Products Description
Air flow type dryer introduction
* Raw materials :sawdust, suitable for drying the moisture 20-50% final moisture 8-12% .
* Diameter of raw materials: 3-5mm.
* Temperature of hot air: 180-250 °.
* Diameter of raw materials: 3-5mm.
* Temperature of hot air: 180-250 °.
*Application :use sawdust to make wood briquettes and make charcoal products .
* Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials.
*Features: this air flow type dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.
* Parts: the wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
* Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials.
*Features: this air flow type dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.
* Parts: the wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
1.What can make sawdust ?
the raw materil could be wood log ,wood briquettes ,wood branch, rice husk, peant shells, bamboo, coconut shell,etc .
2.Sawdsut can make what?
Wood briquettes production line
Raw materials----Crusher----Conveyor----Dryer----Conveyor----Biomass briquette machine
1. Crush the raw material into small pieces (size is about 3-5mm), if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of briquette machine by worker or by screw conveyor;
4. Produce the briquette from the dried material without any additive by the wood briquette machine.
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of briquette machine by worker or by screw conveyor;
4. Produce the briquette from the dried material without any additive by the wood briquette machine.
Crusher
we have different types crusher to deal to different raw material like wood log , tree branch, coconut shells, rice husks , peant shells please tell me you raw material and you capacity .
wood briquette machine
we can make wood briquettes size from 50mm-80mm,please tell me what is you raw materia and you capacity and you application.
Charcoal products production line
Raw materials----Crusher----Conveyor----Dryer----Conveyor-----Carbonization furnace (oven)
1. Crush the raw material into small pieces (size is about 3-5mm), if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of carbonization stove by worker or by screw conveyor;
4. Produce the caharcoal from the dried material without any additive by the carbonization stove.
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of carbonization stove by worker or by screw conveyor;
4. Produce the caharcoal from the dried material without any additive by the carbonization stove.
Model | Capacity |
QHL-1 | 1.5-2t/24h |
QHL-2 | 3-4t/24h |
QHL-3 | 4.5-6t/24h |
QHL-4 | 6-8t/24h |
3.Where to use these charcoal ?
1.Using our charcoal press ball machine to make charcoal balls ;
2.Using charcoal powder extruder to make charcoal briquettes;
3.Using our hydraulic tablet press to make shisha charcoal .
2.Using charcoal powder extruder to make charcoal briquettes;
3.Using our hydraulic tablet press to make shisha charcoal .
4.Using our honeycomb press machine to make honeycombs .
Wood pellets production line
Raw materials----Crusher----Conveyor----Dryer----Conveyor----wood pellet mill
1. Crush the raw material into small pieces (size is about 3-5mm), if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of wood pellet mill by worker or by screw conveyor;
4. Produce the caharcoal from the dried material without any additive by the wood pellet mill .
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of wood pellet mill by worker or by screw conveyor;
4. Produce the caharcoal from the dried material without any additive by the wood pellet mill .
Details Images
Model | Capacity(kg/h) | Power | Package size(m) | Wood Waste Consumption |
HJ-4 | 300-400 | 4kw | 1.5X1.22X0.98+2.3x1.4x1.5 | 10-15kg/h |
HJ-6 | 400-500 | 5.5kw | 1.45x1.2x1.0+2.5x1.9x1.5 | 25-30 kg/h |
HJ-8 | 700-800 | 11kw | 2.24*1.63*1.61+1.55*1.2*1.5 | 35-40 kg/h |
Product packaging
We packed dryer in standard container.
Company Profile
Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years.
There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.Our machines have the best quality and we have got many certification such as CE, ISO, BV.
Our service
(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out
as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out
as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.
Our Advantages
Best price , stock , the most professional techincal personal
all we have
choose us , you have !
Contact me