Product Details

GB30720 Standard Aluminum Pans for Domestic Gas Cooking Appliance

1. Introduction

The Standard aluminum Pans are designed according to GB30720:2014. The test pans are made of commercial quality aluminum with density of 2700kg/m², and treated by electrochemical to make the pans appears matte-black to meet the chroma requirements of L≤50, a≤±10, b≤±10. Using a tightening joint to secure the mercury thermometer with a through hole range of 3.0 mm -7.0 mm, the stir tray is made of stainless steel with thickness 1mm.

2. Parameter

Measured heat load/kW	Pans designation /mm									Heating water volume /kg
Measured heat load/kW	Internal diameter measured at the topφA	thickness of base C	thickness of the side D	internal height H		Internal radius E	Area of base /cm²	Mass /g	Mass of lid /g	Heating water volume /kg
≤1.72	200	2	1.5	130		2.5	314	540	125	3
2.08	220			140		3	380	680	149	4
2.48	240			150		3.5	452	800	177	5
2.91	260	2.5	1.8	160			531	965	208	6
3.36	280			170			615	1130	290	8
3.86	300			180			707	1350	323	10
4.40	320			190			804	1520	360	12
≥4.95	340			200		4	907	1800	402	14
Tolerance	±1%			±1%		0~0.5		±5%	±5%
Pan surface treatment requirements: Matt black bottom pan, the chroma requirements: L≤50, -10≤a≤±10, -10≤b≤±10 (test condition: Adopt SCI method, standard observation angle is 10°, use D65 standard light source)
Pan:					Lid:
Stirrer and stir tray: Note 1: A is the inner diameter of the pan, H is the depth of pan Note 2: Part material: stir tray is made of aluminum plate with thickness of 1mm, knob is made of φ4 stainless steel rod