M, AH, HH series slurry pump
Negotiable /Piece
Min.Order:1 Piece
XiAn Wisdom Computer Info&tech Co., Ltd
Descriptions of M, AH, HH series slurry pump
M 、 AH and HH model slurry pumps are cantilever and horizontal centrifugal slurry pumps.They are designed for the hand-lind highly abrasive, high concentration slurries.They are widely used in metallurgy industry,mining industry and so on.The pumps of this model also can be installed as multi-stage series pumps.
Pump body of M 、AH model pumps has wearable metal liner or rubber liner pumps.The impellers are made of wearable metal or rubber.Both the liner and impeller for HH model pumps are made of wearable metal only.
The shaft seal system of M 、AH and HH model pumps stuffing seal,centrifugal seal (of mechanical seal).The exit of pump can be divided into eight parts,each of which is 45 degrees.So it can fulfill the different requirements that handling slurry to different directions.
Technical Specifications of M, AH, HH series slurry pump
Model | Allowabl e max. power of ass. Motor Kw |
Material |
Clear water performance |
Impeller |
Curve number | |||||||
shea th | Impell er | Capacity | Head H m | Speed n r/min | Max eff % | NPSH m |
Qty | Dia. mm | ||||
m³/h | l/h | |||||||||||
1½ 1B-AH | 15 | M | M | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 | WPA151B01 |
RU | RU | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 3 | WPA151B02A | ||||
1½ 1C-HH | 30 | M | M | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 320 | WPA151E01 |
2/ 1½B-AH | 15 | M | M | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 | WPA215B01 |
RU | RU | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 | WPA215B02 | |||
3/2C-AH | 30 | M | M | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 5 | 214 | WPA32A01 |
RU | RU | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 2-4 | 213 | WPA32A01A | ||||
3/2D-HH | 60 | M | M | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 | WPA32E01 |
4/3C-AH | 30 | M | M | 86.4-198 | 24-55 | 9-52 | 1000-1200 | 71 | 4-6 | 5 | 245 | WPA43A01 |
4/3D-AH | 60 | |||||||||||
4/3C-AH | 30 | RU | RU | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 5 | 245 | WPA43A01A |
4/3D-AH | 60 | |||||||||||
4/3C-AH | 30 | M | M | 97.2-194.4 | 27-54 | 9-53 | 1000-2200 | 55 | 3 | 240 | WPA43A02 | |
4/3D-AH | 60 | |||||||||||
4/3E-HH | 120 | M | M | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 5 | 508 | WPA43E01 |
6/4D-AH | 60 | M | M | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 5 | 365 | WPA64A01 |
6/4E-AH | 120 | |||||||||||
6/4D-AH | 60 | M | M | 180-396 | 50-110 | 7-61 | 600-1600 | 55 | 3-8 | 4 | 372 | WPA64A02 |
6/4E-AH | 120 | WPA64F02 | ||||||||||
6/4D-AH | 60 | RU | RU | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 5 | 365 | WPA64A03A |
6/4E-AH | 120 | |||||||||||
6/4D-AH | 60 | M | M | 144-324 | 40-90 | 10-52 | 800-1600 | 55 | 4.5-9 | 2 | 371 | WPA64A04 |
6/4E-AH | 120 | |||||||||||
6/4D-AH | 60 | M | M | 162-360 | 45-100 | 21-64 | 1000-1600 | 55 | 2 | 371 | ESY7996 | |
6/4E-AH | 120 | |||||||||||
6/4D-AH | 60 | M | M | 126-288 | 35-80 | 10-55 | 800-1600 | 58 | 2-2.5 | 2 | 365 | ESY7997 |
6/4E-AH | 120 | M | M | 126-288 | 35-80 | 10-55 | 800-1600 | 58 | 2-2.5 | 2 | 365 | ESY7997 |
6/4S-HH | 560 | M | M | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 | WPA64E01M |
6S-H | 560 | M | M | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 5 | 711 | WPA66A91 |
8/6E-AH | 120 | M | M | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 5 | 510 | WPA86A01 |
8-6R-AH | 300 | |||||||||||
8/6E-AH | 120 | M | M | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 5 | 510 | WPA86A01B |
8/6R-AH | 300 | |||||||||||
8/6E-AH | 120 | M | M | 360-828 | 100-230 | 7-70 | 400-1140 | 70 | 3-6 | 8 | 536 | WPA86A02 |
8/6R-AH | 300 | |||||||||||
8/6E-AH | 120 | RU | RU | 360-828 | 100-230 | 7-52 | 400-1000 | 70 | 2.5-6 | 4 | 536 | WPA86A03 |
8/6R-AH | 300 | WPA86F03 | ||||||||||
8/6E-AH | 120 | M | M | 288-648 | 80-180 | 5-47 | 400-1100 | 60 | 3-6 | 2 | 510 | ESY7998 |
8/6R-AH | 300 | |||||||||||
8/6T-HH | 1200 | M | M | 576-1152 | 160-320 | 32-95 | 450-725 | 65 | 6-10 | 5 | 965 | WPA86E01 |
10/8E-M | 120 | M | M | 540-1228 | 150-340 | 15-61 | 600-1100 | 70 | 4.5-8 | 4 | 549 | WPA108B02 |
10/8R-M | 300 | |||||||||||
10/8E-M | 120 | M | M | 540-1080 | 140-300 | 18-66 | 700-1100 | 62 | 4.5-7.5 | 4 | 549 | WPA108B02 |
10/8R-M | 300 | |||||||||||
10/8E-M | 120 | M | M | 666-1440 | 185-400 | 14-60 | 600-1100 | 73 | 4-10 | 5 | 549 | WPA108B03 |
10/8R-M | 300 | |||||||||||
10/8E-M | 120 | RU | RU | 540-1188 | 150-330 | 10-42 | 500-900 | 79 | 5-9 | 5 | 549 | WPA108B03A |
10/8R-M | 300 | |||||||||||
10/8ST-AH | 560 | M | M | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 5 | 686 | WPA108A01A |
RU | RU | 540-1180 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | WPA108A01A | ||||
12/ 10ST-AH |
560 | M | M | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 |
5 |
762 | WPA1210A02 |
M | M | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | WPA1210A03A | ||||
14/ 12ST-AH |
560 | M | M | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 |
5 |
965 | WPA1412A01 |
RU | RU | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-8 | WPA1412A01A M | ||||
16/ 14ST-AH | 560 |
M |
M |
1368-3060 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
5 |
1067 |
WPA1614A01 |
16/ 14TU-AH | 1200 | |||||||||||
16/ 14ST-AH | 560 | M | M | 1699-3798 | 427-1055 | 14-75 | 250-550 | 75 | 4.5-6 | 8 | 1067 | ESY7771 |
16/ 14TU-AH | 1200 | |||||||||||
18/ 16ST-AH | 560 | M | M | 2160-5040 | 600-1400 | 8-66 | 200-500 | 80 | 4.5-9 | 5 | 1245 | ESY6544 |
18/ 16TU-AH | 1200 | |||||||||||
20-18TU-AH | 1200 | M | M | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 5 | 1370 | WPA2018A01 |
Note:
1.RU refers to Rubber material, M refers to Alloy wear-resistant materials
2. Recommended flow range is 50%Q'≤Q≤110%Q'(Q'≈Corresponding to the maximum efficiency point flow)
3. NPSH refers to when the speed maximum, recommend corresponding NPSH to Q'.