The AIM-M200 monitors the insulation resistance of medical IT system, At the same time, the load current and temperature of the IT
system transformer is monitored. In combination with ASG100, AIL100 series insulation fault locators and the appropriate measuring
current transformers, the AIM-M200 is designed to support insulation fault location
Parameters/Model | AIM-M10 | AIM-M100 | AIM-M200 | |
Auxiliary power | Voltage | AC220V(±10%) | DC24V(±25%) | |
Frequency | 50/60Hz | — | ||
Power consumption | <5VA | <8VA | <3VA | |
Insulation monitoring | Insulation resistance measurement range | 10~999kΩ | ||
Accuracy | 0~±10% | |||
Alarm value range | 50~999kΩ | |||
Response time | <2s | |||
Measuring voltage | <12V | |||
Measuring current | <50uA | |||
Current Monitoring | Measurement value | 2.1~50A | ||
Alarm value range | 5~50A | |||
Accuracy | 5% | |||
Display method | Value display | Percentage display | Value and percentage display | |
Temperature Monitoring | Sensor | PT100 | ||
Measuring range | -50~+200℃ | |||
Alarm value range | 0~+200℃ | |||
Power output | 24VDC | 2W | None | |
Alarm Output | Output | 1 relay | 2 relay(programmable) | 2 relay (not programmable) |
Contact Capacity | AC 250V/3A DC 30V/3A | |||
Communications | 1 RS485 , Modbus-RTU | 2 RS485 , Modbus-RTU | 1 RS485, Modbus-RTU | |
1 CAN, custom protocol | ||||
Environment | Operating temperature | -10~+50℃ | ||
Storage temperature | -20~+70℃ | |||
Relative humidity | 5%-95%,No condensation | |||
Altitude | ≤2500m | |||
Rated impulse voltage / pollution degree | 4KV/3 | |||
EMC & EMR | IEC61326-2-4 |