German technical background VOK®- AP PE 03 Primary polyethylene dispersion, release agent for metal casting.

Product Information

Chemical composition: the primary polyethylene dispersion contains anionic and non-ionic emulsifiers.

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Density (20 ℃): 0.98 g/ml

Non volatile matter (1h, 125 ℃): 40%

Carrier: water

Melting point (wax composition): 95 ℃

Viscosity (20 ℃): 20 mPa · s

PH value (20 ℃): 9

Storage and transportation

The product is sensitive to temperature and must be stored and transported between 5 ℃ and 35 ℃. Stir well before use.

application area 

Mold release agent for metal casting

Features and Benefits

German technical background VOK®- AP PE 03 is particularly recommended for use in water-based release agents for aluminum die casting. Under high temperature, it still has good substrate wettability, good film-forming property and is well adsorbed on the surface of the casting film to protect the mold from damage, so as to produce a good finished product appearance. German technical background VOK®- AP PE 03 still has good stability in hard water.