Cooling Tower Filler, description about very efficient Easy Installation Sturdy PVC cooling tower film fill on China Suppliers Mobile

Product Details

Product Description

very efficient Easy Installation Sturdy PVC cooling tower film fill

The principle of operation of cooling tower fill is to put as much water surface area in contact with as much air as possible, for the longest amount of time possible. Film fills allow the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow. Cooling tower sheet fills or media, come in many different forms and “micro-structures,” each having unique characteristics to fit various applications. Film fills are selected for direct replacement, performance enhancement, and water condition compatibility. Each fill has performance characteristics that allow selections to be made for various heat loads, flow rates, water quality, and horse power combinations.

Item	Cooling tower fill
Material	100% virgin PVC material
Thickness	0.25mm-0.6mm
Sheet size	Customized

cooling tower fill

EAC Evaporative Condenser is best suited for a project. The information contained within this section is geared towards the use of evaporative condensers in the HVAC and light industrial markets only. There are two types of evaporative condensers: combined flow and counterflow.

Material: PVC(polyvinyl chloride)
Water temperature: -35~65℃
Application: cross-flow cooling tower
Sheet thickness: 0.25-0.45mm
Sheet width: 1330mm
Sheet length: customized
Color: black and gray

cooling tower fill

ML cooling tower fill material is a hanging film type cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This fill provides much more water surface exposure per cubic foot than splash type fill.

Material: Thermal Formed PVC
Water temperature: 35~65℃
Tensile Strength: 6,300 psi(at room temperature)
Tensile Modulus: 325,000 psi
Specific Gravity: 1.50
Maximum Continuous Hot Water Temperature: 52℃
PVC Sheet Thickness: 0.25mm,0.40mm
Sheet Spacing: 19mm

LC Cooling tower fill

It has the advantages of direct replacement, performance enhancement, and water condition compatibility. Allow various heat loads, flow rates, water quality, and horse power combinations selections.

Material: PVC/PP
Water temperature: -35~65℃
Application: cross-flow cooling tower
Sheet Thickness: 0.25-0.45mm
Gap:20mm
Sheet width: 750mm/1000mm
Sheet length: Customized

Normal Size of Liangchi cooling tower fill:750*1600mm,750*800mm,750*400mm.

KK cooling tower fill

cooling tower fill is made from PVC injection molding under high pressure,it has special structure form, not only certain stiffness, but some flexibility.
Due to good elasticity, the filler would chatter under the water-drop impact effect lead to some water drop rebound to above for water redistribution.

Material: Thermal Formed PVC
Water temperature:-35℃~65℃
Application: square(cross flow) cooling tower
Sheet thickness: 0.25-0.45mm
Sheet gap: 19mm
Sheet width: 730mm 750mm 950mm
Sheet length:customized

Round type cooling tower fill

Fill material : PVC / PP
Fill color:Black / blue
Fill Height: 200/250/300mm length: any
Fill sheet thickness :0.35mm-0.6mm
Working temperature :-35~65℃

Normal Size: 500mmX1000mm

SP Cooling Tower Fill

Material：Thermal Formed PV
Application: Cross Flow cooling tower
Sheet thickness: 0.25-0.45mm
Sheet spacing:16mm,18mm
Sheet width: 850mm,1000mm
Sheet length: 1000mm,or Customized
Color: black or gray

Oblique cooling tower fills

Oblique cooling tower fills also called cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent-welded for maximum strength and resistant to UV, rot, fungus, organic and inorganic solvents, acids, alkalis, and chemicals normally found in cooling tower waters.

Material: PVC,PP
Water temperature: -35~65℃
Application: counter-flow cooling tower
Sheet pitch:12/15/19mm
Sheetwidth:200mm,250mm,250mm,300mm,350mm
Sheet thickness 0.35-0.6mm

Color: Black,green,blue,etc.
Density: 1.39-1.45g/cm³

S Wave Counter Flow PVC Cooling Tower Fill

S wave filler is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation.

With the development of the plastic industry, counter-current tower drench water plastic packing "S" shape ladder wave, obliquely wave, which has the heat dissipation ,good performance ,Ventilated small resistance, durable, based on the easy and other advantages, it is widely used in different types of large, medium, small, cooling tower.

Size: Width 500mm, length 800-1400mm.
Thickness: 0.2~0.4mm
Applicable Temperature: -35~65℃
Color: Blue, black, green etc
Shaping mode: Compression molding
Cooling Tower type: Counter flow

Packing&Shipping

very efficient Easy Installation Sturdy PVC cooling tower film fill We always pack the cooling tower fill on pallets with film wrap, If need, we can also pack them in wooden carton.

Our related products

Hebei Lanyu Rubber and Plastic products company supply you cooling tower fills, which is belong to couterflow cooling tower fills,. and use it for square water cooling tower very much more. We also can provide you all kind of cooling tower nozzles . If any of our products meet your demand ,please contact us in time .

Packing Method: Carton & Plastic Film, Pallet, Wooden Box or Crate, applicable to the container shipping. Deliver Time: Within 15days since receiving the deposit or according to the quantity of your need. Transport Ways: By sea, By air ,By express delivery.

For more details, please no hesitant to contact me as following: