PFCL201C-10KN/20KN ABB Tension amplifier (imported from Switzerland)

PFCL201C-10KN/20KN ABB Tension amplifier (imported from Switzerland)

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

Changing the setting values of parameters M15, V238 and V243 is allowed only

when the recorder is not triggered.

The post-triggering recording length defines the time during which the recorder

continues to store data after it has been triggered. The length can be changed with

SPA parameter V240. If the post-triggering recording length is defined to be the

same as the total recording length, no data stored prior to the triggering is retained in

the memory. By the time the post-triggering recording finishes, a complete

recording is created.

Triggering of the recorder immediately after it has been cleared or the auxiliary

voltage connected may result in a shortened total recording length. Disconnection of

the auxiliary voltage after the recorder has been triggered, but before the recording

has finished, on the other hand, may result in a shortened post-triggering recording

length. This, however, does not affect the total recording length.

At a power reset, triggered recorder data is retained in the memory provided that it

has been defined non-volatile.