TP20D is a power surge protector; it is used for surge protection of commercial lighting power sources such as street lighting (ClassI, ClassII), landscape lighting, and surge protection for power ports such as security, electrical appliances, and sockets.

 

TP20D has a fully sealed enclosure that is fire, water, dust and IP65 rated.
The lightning protection device adopts full mode protection, adopts UVT technology, and has leakage current and freewheeling interruption function.

 

The product is small and comes with L, N and PE cables for easy installation and application. The product's maximum protection lightning current is 20kA, which can withstand 20kV surge voltage shock.

 

Agency	Standard	Agency File Number
CB	IEC61643-11	HU-002503
TUV	EN61643-11	50427906
CE	EN61643-11	50427907

 

 Features:
 Resistant to Peaks and Surges of up to 20kA
Class III Protection
Maximum Surge Current = 20,000 Amps using industry standard 8/20 μSec wave
For use with Voltage up to 277V, 50/60 Hz. Power Supply
High Temperature Enclosure: Up to 158°F (70°C) max. Surface Temperature Rating
LED Indicator Instruction on the SPD:

 

With led indicator to tell u if the SPD works or not.

 

 

Benefits:
Maximize the Lifetime Value of LED Indoor & Outdoor Lighting Applications

Lower Maintenance Costs
Peace of mind on Product Performance

 

Product Specifications:
• Rated Voltage (Max. Continuous Voltage) – UC: 390VAC
• Nominal Discharge Current (8/20μs) - In: 10kA
• Max. Discharge Current (8/20μs) - Imax: 20kA
• Nominal Discharge Voltage(1.2/50μs) - Vn: 20kV
• Max. Discharge Voltage(1.2/50μs) - Vmax: 40kV
• Voltage Protection Level - Up: 1.5kV
• Response Time - t A : <25nS
• Operating Temperature Range: - 40°C ~ +80°C
• Size (L *W* H): 81 * 38.6 *16.5mm

 

 

 

Built-in UVT technology:

After many tests, the circuit model was established and the ultra-low voltage triggering scheme (UVT1) was introduced. It was applied to the new totem surge suppressor, which greatly improved the surge protection efficiency and played a good role in the protected equipment. Surge protection effect.

 

Series Connection:

 

Please Notes:

1. The connection line of the lightning arrester will be connected after tining.
2. If there are no wiring terminals, wires should be welded,and the welds need to do isolation treatment.
3. L----Brown; N----Blue; PE---Yellow and Green.

 

 

 Applications:

 

Outdoor and Commercial	Parking garage/lot Lighting
LED Lighting	Flood lighting
Roadway lighting	Tunnel lighting
Digital signage	Street lighting
Security power supply	High Bay Lighting
Wash wall lighting	Landscape Lighting