Introduction 
Our this charcoal machine is the device of using the screw extrusion principle to squeeze the powder materials (chemical materials, refractory materials, cement materials iron ore, copper or other matallurgical materials) into certain density stick shape briquettes (round, rectangular, hexagonal, plum-flower, triangular etc.) with or without hole in the middle. It is also an ideal equipment for large, medium and small smelting plant, refractory plant, coal processing industry, fertilizer plant, chemical plant, boiler, blast furnace, gas producer, shaft kiln, cement plant etc. This machine can make full use of coal resources, and in the production process, it can reduce the fuel cost and improve the calorific value of coal, which increase the efficiency greatly.

Working Process

The machine is a process during which biomass compressed under high pressure and high temperature. After the processing of drying and pressing, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

Characteristics and benifits:

 

1) Briquette with different diameter

 

2) High density, hardness and heating value and capacity, low energy consumption

 

3) Automatic with automatic temperature control system are designed to produce high density wood briquette stick from biomass.

 

 The process for producing charcoal 

 

Raw Material →Crusher Machine → Dryer Machine → Briquette Machine→ Carbonize Stove → Charcoal

 

1.Crush the raw material into small pieces (diameter is about 3-5mm)

 

2.Dry the material by machine or dried it in the sun , till the moisture is less than 12%

 

3.Put the material into feed let of briquette machine

 

4.Produce the briquette stick from biomass material without any additive

 

5.Carbonized the briquette stick

we can supply you the full line to make wood charcoal

1.you should make sure the size of your wood be 3-5mm,or you will need the crusher;

2.you should make sure the humidity be under 12%,or you will need the dryer;

3.we can provide wood briquette machine,tell me how many kgs/h you want;

4.If you want to get wood charcoal,you will also need the carbonization oven.

Feature:

1. Charcoal briquette machine is used to make sawdust into half-charcoal-stick.It is equipped with the autocontrolling heating system.The product of this Charcoal Briquette Machine can be used to heat boiler,fireplace,etc.for warm in house.

2. Charcoal briquette machine working principle

Charcoal Briquette Machine uses the intrinsic attributes of the wood material, by spiral extruding at high temperature, under high pressure, wood element in wood material becomes plastic and makes the fine fiber combine, and then stick solid fuel is formed.

  

Final Products 

 

Description Raw Material

sawdust, wood branches, wood, wood residues, rice husk, sunflower shell, peanut shell, corn stalk, straw, bamboo, cotton stalk, coconut shell, olive, furfural dregs, bagasse, corncob, corn stalk, shrubs and any other agricultural waste.