Hot sell and envrionmental-friendly factory supplier sawdust airflow dryer

------Introduction
The Hot Airflow Type Dryer is such a drying system, it drys the war materials into a standard requirement, so that it can meet the customers' needs. These particular materials are including rice husk, sawdust and wood chip etc. 

 

------Material to be dried:
The kinds of dry equipment can be suitable for more raw materials. Besides the raw materials mentioned in basic type drier, the following raw materials can also be dried. They are hypnone, ABC intermediate, ABS resin, ASC, white carbon black, phthalimidine, catalyst for oxalic acid, accelerant m.d.m, catalyst, deposited carbon powder, p-acetamidobenzene sulfonyl chloride, sodium para-aminosalicylate, terephthalic acid, diethylaniline, titanium dioxide, active, carbon, sodium fluosilicate, fluoric ore, ammmonium sulphate, silica gel powder, synthesis resin, calcium hydrogen phosphate, PP, aureomycin, sodium disilicate, oral glucose, sodium sulfate, sulphide ore, phosphorus ore powder, blue BB, PVC, phosphate fertilizer , acheomycin, ferric oxide, calcium carbonate,ilmenite, copper ore, potato, tail coal, stearate, maize protein, medicine, dose, lees and so on.

------Features

1. Dry strength, high thermal efficiency, large handling capacity;
2. Short drying time, suitable for heat-sensitive materials;
3.Material less contact with the outside world, no pollution, good product quality;
4. Have simple structure, small volume, and convenient operation

 

------Flowchart:
Burn the heat stove-----Generate hot air-----Start the fan and charge

------Operation Principle:
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volumn of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverses along the steel pipe and is rendered dry at teh discharge end. Humid air is continuously exhausted, thus the material is dried.