Best price PLC control HZG Series Single Rotary Drum Dryer for large particles
Best price PLC control HZG Series Single Rotary Drum Dryer for large particles
Best price PLC control HZG Series Single Rotary Drum Dryer for large particles
Best price PLC control HZG Series Single Rotary Drum Dryer for large particles
Best price PLC control HZG Series Single Rotary Drum Dryer for large particles

Best price PLC control HZG Series Single Rotary Drum Dryer for large particles

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Changzhou Haomai Drying Engineering Co., Ltd.

Business Type: Association
Main Products: , , ,

Product Details

Product Description
Best price PLC control HZG Series Single Rotary Drum Dryer for large particles
WORKING PRINCIPLE
Rotary Drum Drier is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from
one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.
The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder.
APPLICATION
This dryer widely used in the following industries:
- Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as: mining, blast furnace slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special requirements, such as: HP vesicant, lees residue, precipitated calcium carbonate, activated clay, magnetic powder, graphite, dregs.
- Drying the material which required low-temperature and continuous drying process.
Product features
(1) Large throughput capacity and continuous operation
(2) Simple configuration and easy to operate
(3) Good adaptability of materials
(4) Low energy consumption
(5) Low maintenance cost
Technical parameters
Specification/Item Production Capacity(t/h) Rolling Speed(r/min) Power(kw) Installation Degree(°) Discharge Humidity

HZG Series Three Rotary Drum Dryer

DESCRIPTION
Three rotary drum dryer is widely used in building materials, metallurgy, chemicals, coal, fertilizer industries to dry the
materials which certain humidity or granularity. Such as coal slurry, metal powder, blast furnace slag, dry mortar, and etc. The requirement of final moisture is depends on different industry and the final moisture can be controlled at 1-0.5% or less. The material should not stick to the wall of the dryer and lifting plate. The heat exchange temperature dryer should not be higher than 750°C. If the material requires be dried in a very high temperature, the inner cylinder of the dryer and the lifting plate should use heat resistant steel plate.
FEATURES
- The inner wall is made by wear resistant manganese plate which is 3-4 times stronger than ordinary steel;
- If the materials initial moisture is15%, the final moisture can be 0.5-1% or less, which is suitable for drying slag powder of
cement plant or dry mortar production line;
- The thermal efficiency is 40% which is higher than the traditional single rotary drum dryer;
- The fuel can use anthracite, bituminous coal, coal, oil and gas. The dryer can dry 20-40mm blocks, pellets ,and powder
materials;
- Easy for installation. The occupied area is 60% less than the traditional single rotary drum dryer which required lower
construction investment,;
- No air leaking out from the dryer which is completely solve the sealing difficulty;
- The material discharge temperature is ≤60 °C , and the dried material can be stored without shed cooling;
- The temperature of outer cylinder is ≤60 °C, the temperature of exhaust gas is <120°C, which extend the usage life of dust collector bag 2 times or longer;
- The energy consumption is 40% lower than traditional single rotary drum dryer.
Product Specification
Exhibition
Company Profile
Changzhou Haomai Drying Engineering Co., Ltd. Specializes in Spin flash dryers, centrifugal spray drying equipment, vibrating fluid bed dryers and other equipment R & D, manufacturing, business and related export services. The factory is located in Sanhekou industrial park, Zhenglu town, Changzhou City, Jiangsu Province. Over the years the design of equipment involved in pharmaceuticals, chemicals, pesticides, electronics, mining, food, dyes, pigments and other areas, and sell our products throughout the whole country. Haomai not only with work experience in a group of more than a decade of lean engineering and technical personal and senior management, but also has a number of excellent production staff. Their research, design, service and so has an excellent ability for many years they concentrated on studying in practice wrap-up, God help those who help themselves, a deep understanding of effective guarantee for the quality of customers' products. Facing with the global energy conservation issue, facing the fierce market competition, Haomai people do not pursue the company's output value and profit maximization, but seek the best product quality. Good quality is our goal and direction of success. Energy conservation is the secret weapon for us to stand out from the crowd. The most energy-saving equipment is also the social responsibility of our heroic people. Over the years, the equipment we designed has achieved good economic and social benefits in various industries. In the face of the past, we are not satisfied; we are working hard to move toward higher goals.
FAQ
Q: Where is your factory?
A: We are located in Changzhou City which about 150km away from Shanghai.

Q: What’s the quality control procedure?
A:We have an experienced technical team to support and provide solutions to meet the project requirements of our clients. We are certified with ISO9001 quality management system. We are following a strict quality control procedure to ensure the product quality.

Q: What is the warranty period?
A: 24 hours timely response of mail and phone calls. The warranty period for non-artificial damage is 1 year after delivery of goods.

Q: What is the payment term?
A: Our regular payment term is: 30% TT in advance, 70% TT before shipment.

Q: Does your price include freight?
A: Our usual price is based on FOB Shangha. We can provide CIF quote upon request.
Delivery Terms
FOBShanghai. The delivery time is 50 working days from advance payment received and technical drawings confirmed.
Payment Terms
50% deposit TT in advance, 50% balance shall be paid by TT before shipment.
Packing
Seaworthy Packing
Warranty
The warranty period for non-artificial damage is 1 year after delivery of goods.

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Machinery > Chemical & Pharmaceutical Machinery > Chemical Machinery & Equipment > Drying Equipment
Categories
Hi~