Best Sale 3 tier dryer rotary drum drying machinery for forage grass
Best Sale 3 tier dryer rotary drum drying machinery for forage grass
Best Sale 3 tier dryer rotary drum drying machinery for forage grass
Best Sale 3 tier dryer rotary drum drying machinery for forage grass
Best Sale 3 tier dryer rotary drum drying machinery for forage grass

Best Sale 3 tier dryer rotary drum drying machinery for forage grass

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Changzhou Haomai Drying Engineering Co., Ltd.

Business Type: Association
Main Products: , , ,

Product Details

Product Description

Best Sale 3 tier dryer rotary drum drying machinery for forage grass


 WORKING PRINCIPLE
Rotary Drum Drier is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from
one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder


APPLICATION

This dryer widely used in the following industries:

- Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as: mining, blast furnace slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special requirements, such as: HP vesicant, lees residue, precipitated calcium carbonate, activated clay, magnetic powder, graphite, dregs.
- Drying the material which required low-temperature and continuous drying process.


FEATURES
(1) Large throughput capacity and continuous operation

(2) Simple configuration and easy to operate

(3) Good adaptability of materials

(4) Low energy consumption

(5) Low maintenance cost
Working Process

Rotary dryer adopts direct flow type of heating with heat soure from firing unit. The material to be dried is pushed back immindiately by spiral board when enters the shell from feeding tank and feeding chute. Because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.

Material
Item
Ore
HP Vesicant
Slag of Blast Furnace
Ammonium
Sulphate
Phosphorus
Fertilizer
Coal
Heating Type
Direct heating
co-current type
Compound heating
Processing Capacity(kg/h)
1000
466
15000
20000
12000
5000
Primary Moisture(%)
30
13
6
1.5
5
6.5
Final Moisture(%)
15
0.3
1
0.1
0.1
0.1
Average Diameter
(mm)
6.5
0.05
4.7
0.5-1.7
0.5
5
Bulk Density of Raw Material(kg/m )
770
800
1890
1100
1500
750
Hot Air Volume(kg/h)
39000
5400
10750
9800
6500
16000
Inlet Temperature (°C)
600
165
500
180
650
570
Outlet Temperature (°C)
42
100
70
80
75
Heat Source
Gas
Steam and
electric
heating
Heavy oil
Coal fuel
hot air furnace
Heavy oil
Heavy oil
Loading Efficiency(%)
6.3
7
7.5
7.8
18
Revolution(rpm)
4
4
3.5
3
4
2
Gradient(m/m)
0.04
0.005
0.03
0.05
0.05
0.043
Dryer Diameter (m)
2.0
1.5
2
2.3
Inner cylinder 0.84
Outer cylinder 2
Inner cylinder 0.95
Outer cylinder 2.4
Dryer Length(m)
20
12
17
15
10
16
Driving Power(kw)
22
7.5
15
11
11
15
Internal Fins
Installation Site
About HAOMAI
Team&Certifications
Packing & Delivery
FQA Q: Where is your factory? A: We are located in Changzhou City which about 150km away from Shanghai. Q: What’s the quality control procedure? A:We have an experienced technical team to support and provide solutions to meet the project requirements of our clients. We are certified with ISO9001 quality management system. We are following a strict quality control procedure to ensure the product quality. Q: What is the warranty period? A: 24 hours timely response of mail and phone calls. The warranty period for non-artificial damage is 1 year after delivery of goods. Q: What is the payment term? A: Our regular payment term is: 30% TT in advance, 70% TT before shipment. Q: Does your price include freight? A: Our usual price is based on FOB Shangha. We can provide CIF quote upon request.

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Machinery > Chemical & Pharmaceutical Machinery > Chemical Machinery & Equipment > Drying Equipment
Categories
Hi~