600W Off Grid Wind Solar Hybrid Power System Include
200W Solar Panel And 400W Wind Turbine For Street Lamp
Product Description
600W Off grid wind solar hybrid system include:
400W Wind turbine 1 pcs
100W mono solar panel 2 pcs
100AH GEL battery 2 pcs
600w pure sine wave inverter 1 pcs
Specification
Solar Panel
Wind Turbine
Model | RX-400H5 |
Rated power | 400W |
Maximum power | 450W |
Nominal voltage | 12/24V |
Start-up wind speed | 2.0m/s |
Rated wind speed | 11m/s |
Survival wind speed | 50m/s |
Weight | 9.5kg |
Wind wheel diameter | 1.3m |
Blades quantity | 3/5 |
Blade material | Nylon fiber |
Generator | Permanent magnet synchronous generator with three-phase alternating current |
Controller system | Electromagnetic/yaw |
Regulating way | Automatic adjustment of wind angle |
Working temperature | -40°C~80°C |
Wind solar hybrid controller
Battery parameters | ||||
Applicable battery voltage | 24V | 48V | ||
Battery protect method | Reverse connection protection ( Blow Fuse); over voltage protection, under voltage protection (for street light and such kind of load) | |||
Voltage at the over voltage protection point | 29.0V±0.2V | 58.0V±0.2V | ||
Voltage at the over voltage recovery point | 27.5V±0.2V | 55.0V±0.2V | ||
Voltage at the under voltage protection point | 21.0V±0.2V | 42.0V±0.2V | ||
Voltage at the under voltage recovery point | 23.0V±0.2V | 46.0V±0.2V | ||
Parameters of wind turbine input port | ||||
Rated power of applied wind turbine | 600W | |||
Rated current of the port | 20A dc (after rectification) | 15A dc (after rectification) | ||
Max. input current of the port | 25A dc (after rectification) | 20A dc (after rectification) | ||
Default speed of the wind turbine generation with limited speed | 500 Rpm (settable) | |||
Default current of the wind turbine generation with limited current | 20A (settable) | |||
wind turbine protection method | Over speed protection, over current protection, induction lightening protection | |||
Unloading method | PWM stepless high-frequency soft unloading (built-in) | |||
MPPT function | Boost MPPT model ( automatic tracking or 5 segments curve tracking) | |||
Input current of MPPT channel | 5A (standard configuration) | |||
Parameters of PV input port | ||||
Rated power of applied PV | 300W/24V (standard configuration) | |||
Rated input current of the port | 15A (standard configuration) 30A (optional configuration) | |||
Charging voltage drop | <0.2V | |||
PV protection method | Reverse connection protection | |||
Unloading method | Open circuit unloading | |||
Parameters of discharge output port | ||||
Qty of output channels | 2 channels | |||
Output current per channel | 12A | |||
Control method of output | light control, time control, dawn mode, maintain output, reverse output | |||
Others | ||||
Display mode | 3 digitsl (LED) display | |||
Communication mode | RS232 (5V electrical level) (standard configuration), RS485/Short-range wireless RF (optional configuration) | |||
Displayed parameters | wind turbine input voltage/current/power/generated capacity/ speed/ unloading current PV input voltage/current/power/generated capacity Battery voltage/charging current/power/total charging capacity/ battery status information | |||
Power consumption in standby mode (screen backlight closed) | ~ 15ma /48V | |||
Operating mode | 3M foil key operation (2 buttons) | |||
Working temperature / humidity range (environment) | -40~+80℃/20~85%RH (non condensing) | |||
Protection grade | IP41 | |||
Controller size (L*W*H) | 158mm*113mm *60mm | |||
Net weight | 1.0KG | |||
100AH GEL Battery
600W Pure sine wave inverter
Power | 600W |
Input Voltage | 12V/24V/48V DC |
Output Voltage | 100/110/120VAC or 220/230/240 VAC |
Continuous Power | 600W |
Surge Power | 1200W |
No Load Current Draw | < 0.6A |
Efficiency | > 87% |
THD | < 4% |
Waveform | Pure sine wave |
Input Voltage Range | 10V-15V/21V-30V/40V-60V |
Frequency | 50Hz/60Hz |
Low battery alarm | 10.5±0.3V/21±0.5V/42±0.5V DC |
Low battery shut down | 10±0.5V/20±0.5V/40±0.5V DC |
Over voltage shut down | 15.5±0.5V/30.5±0.5V/60±0.5V DC |
Over load shut down | 720W over 10 seconds |
Over heating shut down | >75°C |
Over Thermal | shut down the output |
Fuses | Short Circuit |
Working Temperature | Between -10°C and +50°C |
Working Humidity | 20%~90%RH non-condensing |
Storage Temperature | Between -30°C and +70°C |
Dimension | 210*150*70mm |
Net Weight | 1.6±0.2kg |
Gross Weight | 4.5kg |
Application