1000w 48V

Battery parameters

Applied battery voltage

48

Battery protect method

Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection
(for street light and such kind of load)

Voltage at the over voltage protection point

58.0V±0.2V

Voltage at the over voltage recovery point

55V±0.2V

Voltage at the under voltage protection point

46.0V±0.2V

Voltage at the under voltage recovery point

46.0V±0.2V

Battery temperature compensation

5mv/℃/2V (settable) (optional component)

Wind turbines input parameters

Rated power of applied Wind turbines

1000W/48V

The default speed of the Wind turbines generation with limited speed

500 Rpm (settable)

The default current of the Wind turbines generation with limited current

60A (settable)

Wind turbines protection method

over rev protection, over current protection, induction lightening protection

Unloading method

PWM stepless high-frequency soft unloading (built-in)

MPPT function

Boost MPPT model ( automatic tracking or 5 segments curve tracking)

Input current of MPPT channel

12A

PV input parameters

Rated input current of applied PV

1000W/48V

Rated input current of terminal

20A

Charging voltage drop

<0.2V

PV protection methods

Reverse connection protection (voice prompt)

Unloading method

Open circuit unloading

Discharge the output port parameters

output

2 outputs

Current of each output

12A

Output protection methods

Over current protection (15A/30sec. 18A/0.4sec.), short-circuit protection (current > 150A)

Output control methods

light control, time control, reverse output, PWM output (250HZ, only the 2nd output has it)

Others

Auxiliary function

Monitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the
monitor of control terminals installed on the inversion (with voice prompt)

Display mode

Liquid crystal (LCD) display

Communication mode

RS232(5V electrical level)/RS485 (standard)
Short-range wireless (optional)

Displayed parameters

Wind turbines input voltage/current/power/generated energy/rev/unloading current
PV input voltage/current/power/generated energy
Battery voltage/charging current/power/total charging capacity/battery status information
output current/power/abnormal information of the 2nd output port

Power consumption in standby mode(screen backlight closed)

About 20ma /24V system

Operating mode

3M foil key operation (4 keys)

Working temperature / humidity range (environment)

-40~+80℃/20~85%RH（non condensing）

Protection grade

IP41

Controller size (L*W*H)

235mm*148mm *84mm

Net weight

7.0KG

MODEL

RX-2000OGI

AC output voltage

100/110/120/V or 200/220/230/240V

Output power

2000W

Instant peak power

4000W

output wave form

pure sine wave

output frequency

50HZ or 60HZ(±2%)

Output

THD

<4%

Input

DC input voltage

12V or 24V or 36V or 48V

voltage range

10.5-15V or 21-30V or 33-45V or 42--60V

no-load current

<0.75A

Efficiency

>88%

Fuse

12V

40A*6

24V

20A*6

48V

20A*6

Protection

Low voltage alarm

10±0.5V or 20±1V or 30±1V or 38±2V

Low voltage shut down

9.5±0.5V or 19±1V or 28±1V or 37±2V

Over voltage shut down

15.5V or 31V or 46V or 64V

Over temperature shut down

Yes

short-circuit protection

Yes

Over load protection

120%

Inversed protection

Fuse Inversed

Enviroment

Work temperature

—20°c to +50°c

Humidity

20%~90%RH non-dondensation

Storage tmeperature

—30°c to+70°c

Others

Size(mm)

390*180*100

N.W.(KG)

5.5±0.5KG

G.W.(KG)

7.0KG