Product Details

Overview

CATV WiFi ONU offers 1×10/100/1000Mbps Ethernet, 3×10/100Mbps Ethernet, 1 SC/APC connector, 2.4GHz WiFi, 1 RF output interface, plastic casing, external power supply adapter.

The CATV WiFi ONU is meant to function as an HGU (Home Gateway Unit) in a variety of FTTH setups. Data service access is provided through the carrier-class FTTH application. The CATV WiFi ONU is based on EPON technology, which is mature, stable, and cost-effective. It has access to EPON’s main OLT.

The 3FE EPON ONU features high reliability, ease of management, configuration flexibility, and good quality of service (QoS) to match the technical requirements of China Telecom’s EPON CTC3.0 module. The Realtek chipset is responsible for its creation.

Features

Support EPON Standard of China Telecom EPON CTC3.0

Support ONU auto-discovery/Link detection/remote upgrade of software

WAN connections support Route and Bridge mode

Route mode supports PPPoE/DHCP/ static IP

Support WIFI Interface and multiple SSID

Support CATV interface for Video Service and control by OLT

Support QoS and DBA

Support port Isolation and port vlan configuration

Support Firewall function and IGMP snooping/Proxy multicast feature

Support LAN IP and DHCP Server configuration

Support Port Forwarding and Loop-Detect

Support TR069 remote configuration and maintenance

Specialized design for system breakdown prevention to maintain stable system

Specification

Hardware Specification

Technical item	Details
PON Interface	1 EPON port(EPON PX20+)
	Receiving sensitivity: ≤-27dBm
	Transmitting optical power: 0~+4dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/APC Connector
LAN Interface	1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
CATV Interface	RF, WDM ,optical power : +2~-18dBm
	Optical reflection loss: ≥45dB
	Optical receiving wavelength: 1550±10nm
	RF frequency range: 47~1000MHz, RF output impedance: 75Ω
	RF output level: 78dBuV
	AGC range: 0~-15dBm
	MER: ≥32dB@-15dBm
Wireless	Compliant with IEEE802.11b/g/n,
	Operating frequency: 2.400-2.4835GHz
	support MIMO, rate up to 300Mbps,
	2T2R,2 external antenna 5dBi,
	Support: Multiple SSID
	Channel: Auto
	Modulation type: DSSS, CCK and OFDM
	Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
LED	11 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、Worn、 Normal(CATV)
Push-Button	3,For Function of Reset, WLAN, WPS
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	155mm×92mm×34mm（L×W×H）
Net Weight	0.24Kg

Panel lights Introduction

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Worn (CATV)	On	Input optical power is higher than 3dbm or lower than -13dbm
Worn (CATV)	Off	Input optical power is between -13dbm and 3dbm
Normal (CATV)	On	Input optical power is between -13dbm and 3dbm
Normal (CATV)	Off	Input optical power is higher than 3dbm or lower than -13dbm