OverviewCATV WiFi XPON ONU has 1×10/100/1000Mbps Ethernet port, 1 x 10/100Mbps Ethernet port, 1 SC/APC connector, 2.4GHz WiFi, 1 RF output interface, plastic casing, external power supply adapter.
The XPON ONU with WiFi is designed by Realtek chipset 9602C. It supports many services and can be used as a CATV WiFi XPON ONU, a GEPON ONU with WiFi, or a CATV ONU.
The XPON ONU with WiFi is based on XPON technology, which is mature, stable, and cost-effective. It can automatically switch between EPON and GPON when it has access to an EPON or GPON OLT. In various FTTH implementations, the XPON ONU with WiFi is built as an HGU (Home Gateway Unit), and the carrier-class FTTH application enables data service access.
The CATV ONU provides high reliability, high bandwidth, simple management, flexible configuration, and good quality of service (QoS). It can meet the technical requirements of China Telecom’s EPON CTC3.0 module and the ITU-TG.984.X GPON Standard. It also works nicely with OLT products from other brands.
Functional FeatureSupport EPON/GPON mode and switch mode automatically
Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
Support IPv4 and IPv6 dual mode
Support 2.4G WIFI and Multiple SSID
Support CATV interface for Video Service and remote control by Major OLT
Support LAN IP and DHCP Server configuration
Support Port Mapping and Loop-Detect
Support Firewall function and ACL function
Support IGMP Snooping/Proxy multicast feature
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
SpecificationHardware Specification
Technical item | Details |
PON Interface | G/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-27dBm |
Transmitting optical power: 0~+4dBm |
Transmission distance: 20KM |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/APC Connector |
LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV Interface | RF, WDM ,optical power : +2~-18dBm |
Optical reflection loss: ≥45dB |
Optical receiving wavelength: 1550±10nm |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω |
RF output level: 78dBuV |
AGC range: 0~-15dBm |
MER: ≥32dB@-15dBm |
Wireless | Compliant with IEEE802.11b/g/n, |
Operating frequency: 2.400-2.4835GHz |
support MIMO, rate up to 300Mbps, |
2T2R,2 external antenna 5dBi, |
Support: Multiple SSID |
Channel: Auto |
Modulation type: DSSS, CCK and OFDM |
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
LED | 10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、Internet、Worn、 Normal |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
Panel lights Introduction
Pilot Lamp | Status | Description |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). |
Off | The WIFI interface is down. |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. |
PWR | On | The device is powered up. |
Off | The device is powered down. |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. |
Off | The device registration is incorrect. |
LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). |
Off | Port (LANx) connection exception or not connected. |
INTERNET | Blink | The device network connection is normal. |
Off | The device network connection is abnormal. |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -13dbm |
Off | Input optical power is between -13dbm and 3dbm |
Normal (CATV) | On | Input optical power is between -13dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -13dbm |
ApplicationTypical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
Typical Business:INTERNET、IPTV、IP Camera 、WIFI 、CATV etc