Freq6000 10-6000MHz RF Spectrum Analyzer w/ RF Signal Source RF Power Meter for Wifi LTE GPRS
Negotiable
Min.Order:1
HP368 50Hz-3.8GHz Digital RF Power Meter -60 To +7dBm RF Power Detector For Power Measurement
100MM*100MM LT100-L-2 XYZR Axis Manual Sliding Table Translation Platform Manual Linear Stage
FNIRSI SG-003A Signal Source Pocket-Sized 0-15V 0-24MA PWM Analog Quantity Output Signal Generator
4G LTE Router Antenna High Gain Outdoor Directional Antenna With 15M Feeder Line S-MA Male Connector
L102 Exposure Meter Film Top Reflective Metering Support Hot Cold Shoe Photography Light Meter
Freq6000 10-6000MHz RF Spectrum Analyzer w/ RF Signal Source RF Power Meter for Wifi LTE GPRS
Description:
Smart Frequency Spectrometer is a simple hand-held broadband spectrum analyzer with a PC display, which integrates a high-performance frequency synthesizer and balanced mixer to ensure high performance, small size and low power consumption.
Smart Frequency Spectrometer uses standard USB2.0 (miniUSB) for device communications. It is suitable for indoor, outdoor and even outdoor environments. The device is light and compact with its own display, which is easy to carry.
The frequency combination included in the Smart Frequency Spectrometer can basically cover various popular wireless frequency bands, including WiFi, B-T, wireless audio and video, LTE, GSM, GPRS, satellite communications, CATV and the like.
The 2018V2 version expands sensitivity, adds maximum function, and maximum hold function (used to measure remote control signals).
Specifications:
- Net Weight of Main Unit: 90g (CNC Aluminum Alloy Shell)
- USB Power Supply 300mA
- Using PL2303SA serial-USB chip for communication
3 Major Functions:
- Left SMA Port: Input signal for spectrum measurement
- Right SMA Port: For point frequency rf source/sweep source
- Left SMA Port: Input point frequency signal and set the start frequency and the stop frequency to be the same when it is used as a power meter
Spectrum Analysis Parameters:
- Measured Signal Frequency Range: 10-6000MHz (Freq6000)
- Measured Signal Power Range: -70dBm to +10dBm
- Frequency Resolution: 1KHz
- Resolution Bandwidth (RBW): Adaptive 1KHz to 100KHz
- Frequency Stability & Accuracy (Typical): ± 0.5ppm
RF Signal Source Parameters:
- Frequency Range: 25-6000 MHz (Freq6000)
- Power: -10dBm
- Frequency Resolution: 1KHZ
- Frequency Stability & Accuracy (Typical): ±0.5ppm
Package Included:
- 1 x RF Spectrum Analyzer Freq6000
Application Scenario (different frequency bands need to be equipped with different antennas)
1. Signal measurement of FM radio frequency band (88MHz-108MHz)
2. Measurement of walkie-talkie frequency band (VHF: 136-174MHz; UHF: 400MHz-480MHz)
3. Measurement of wireless remote control frequency band (315MHz/433.92MHz)
4. Measurement of WiFi and B-T band (2.4-2.45GHz)
Operation Instructions:
1. Power Supply: Connect it to power supply (computer) via micro-USB.
2. Power Supply Switch: It is next to the USB port. Turn the switch to the left to turn it on. Turn the switch to the right to turn it off.
3. Input: Connect RF input signal through the SMA1 interface. SMA2 is a sweep local oscillator output signal, which can be used as a signal source.
4. Press the "OK S3" button to start measuring, or press "Updata" through the host computer.
5. Press button S1 to change the position of the cursor (shift left)
Press button S5 to change the position of the cursor (shift right)
Press S2 to change the data of the cursor position plus
Press S4 to change the data of the cursor bit minus
After entering the system, the cursor indicates the selected digit. At this time, the up and down buttons can modify the value of the selected digit. When the cursor is at the last digit (or first digit) of the selected item, press the right button (or left button) to toggle the selected item. When the parameters are set, press the middle OK button to make the settings take effect.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample ususally take within 3 working days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.
Q4. How to proceed an order?
A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.
Q5. After paid, what info of the supplier provided?
A: Tracking number
Q6: Do you offer guarantee and after-service for the products?
A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.
Packing and Shipping
Package: Normally we use the standard paper package to export worldwide.
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.
3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.
4. By Sea: Delivery from the Shenzhen sea port .
Company information
TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field.
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery