LS162 Portable Transmission Solar Film Tester Meter w/ VL Transmission UV IR Rejection Blocking Rate
Negotiable
Min.Order:1
ADF4355 Module RF Signal Generator with Shell OLED Display VCO Microwave Frequency Synthesizer PLL
WT103 Digital Teslameter Permanent Magnet Material Surface Magnetic Field GS/MT
WT10A LCD Surface Magnetic Field Tester Ns Function Digital Teslameter Gaussmeter
LibreVNA Antenna Analyzer 100KHz To 6GHz USB Based Full 2-Port Vector Network Analyzer For Radios
PS100 137.5MHz - 2.7GHz UV RF Antenna Analyzer SWR Meter Tester with Aluminum Alloy Shell
LS162 Portable Transmission Solar Film Tester Meter w/ VL Transmission UV IR Rejection Blocking Rate
LS162 Transmission Meter Introduction:
LS162 transmission meter is a compact and small transmission meter that can simultaneously test three parameters of light transmittance, ultraviolet rejection rate and infrared rejection rate. It is suitable for the display, exhibition, production, quality inspection, inspection and other occasions. The window film transmission meter can test the material optical properties such as automotive explosion-proof films, architectural films and laminated glass. The instrument has been widely used in solar film manufacturers, automotive film distribution, automotive film retail sales system.
LS162 Transmission Meter Application:
LS162 Transmission Meter Parameters:
- UV peak wavelength: 365nm
- IR peak wavelength: 940nm
- Visible light: 380nm-760nm full wavelength, in line with CIE photopic luminosity function
- Resolution: 0.1%
- Measurement accuracy: better than ± 2% (colorless and uniform transparent material)
- Maximum sample thickness: <8mm
- Dimension: 120mm x 25mm x 75mm
LS162 Transmission Meter Characteristics:
1. The window film transmission meter has simple operation and the measurement is fast. Just put the measured object into the test slot then the visible light transmittance, ultraviolet and infrared rejection rate will be immediately displayed on the interface.
2. The instrument has small size and it is very convenient to carry out; the test card slot is 8mm wide, which can directly test the car windshield.
LS162 Transmission Meter Test Car Side Windshield
3. The instrument has a data lock function. After the test is completed, press the HOLD button to lock the test data. The data will remain on the display interface after taking away the tested material.
4. LS162 portable solar film transmission meter has real-time dynamic calibration function. When there is no test object, the instrument will automatically return to the original data state to ensure more accurate test data.
LS162 Window Tint Meter Original Status
5. The transmission meter features ultra-low power consumption. And the instrument will automatically shut down after 3 minutes without any operation. With this design, the instrument is more energy efficient.
Package Included:
- 1 x Set of Solar Film Tester
Note:
- It is powered by 4pcs AAA alkaline dry batteries which are not included in the package.
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
FAQ About LS162 Transmission Meter:
1. The difference between LS162 (940nm) and LS162A (1400nm) window film transmission meters:
The main difference between LS162 and LS162A is that the IR bands are different. The infrared peak wavelength of LS162 is 940nm and the LS162A is 1400nm. These two bands are more representative bands. The absorbing film has a better infrared rejection effect at 940nm.The metallic film (Insulation by reflection) has a better infrared rejection effect at 1400nm. Please choose the appropriate instrument according to your own film.
2. The difference between LS162 and LS163 window film transmission meters:
LS162 measuring notch width is 8mm, LS163 measuring notch width is 6mm;
LS162 use point light source, while LS163 use parallel light path. The latter has higher data accuracy when measuring thick materials;
LS162 can only measure visible light transmittance, infrared and ultraviolet rejection rate, while LS163 can measure infrared and ultraviolet transmittance in addition to these three data;
LS163 has three display interfaces, the screen can be rotated in four directions and has a screen backlight, but LS162 does not.
3. The difference between LS162 and LS101 window film transmission meters:
LS162 use point light source, while LS101 use parallel light path. The latter has higher data accuracy for measuring thick materials;
LS162 can only be powered by battery, while LS101 can also be powered by USB cable in addition to battery;
LS101 has screen backlight, while LS162 has no screen backlight;
Except for the above differences and the differences in appearance, the other parameters of LS101 and LS162 are completely the same.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample ususally take within 3 working days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.
Q4. How to proceed an order?
A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.
Q5. After paid, what info of the supplier provided?
A: Tracking number
Q6: Do you offer guarantee and after-service for the products?
A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.
Packing and Shipping
Package: Normally we use the standard paper package to export worldwide.
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.
3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.
4. By Sea: Delivery from the Shenzhen sea port .
Company information
TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field.
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery