PS100 137.5MHz - 2.7GHz UV RF Antenna Analyzer SWR Meter Tester with Aluminum Alloy Shell 

Specifications:  
- Model No.: PS100
- Working Frequency: 137.5MHz~2700MHz    
- Stepped Frequency: 1kHz    
- Display: 2.4inch TFT with resolution 320*240(QVGA)    
- Power Consumption <1.5W    
- Charging Current: 400mA    
- Charging Port: USB    
- Auto Power Off: Settable 5-60minutes    
- Measured Parameters: Impedance, reactance, SWR and S11    
- Resolution: 4-digit readings     
- Frequency Accuracy: <±10ppm    
- Connector: SMA-K    
- Impedance Measurement Range:
  1Ω~1000Ω @frequency < 1300MHz;
  1Ω~300Ω @frequency >1300MHz (Impedance Absolute Value)   
- Standing Wave Measurement Range:
  1~65 @frequency < 1300MHz;   
  1~10 @frequency >1300MHz
- S11(dB)Measurement Range: 0dB to -50dB    
- Error (Single-point measurement):
   For Impedance: < Impedance absolute value x 5%±0.1Ω (Z<200Ω, <1.5GHz)
   For Standing Wave: < Effective readings x 10%±0.1
   For S11: 0.1dB/5° (0dB to -10dB)
   For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
- Directivity: < 35dB (140MHz to 2GHz after calibration); < 30dB (2GHz to 2.7GHz)
- Scanning Points: 280
- Output Level: -18dBm
- Working Temperature: 0℃ to 40℃  
- Atmospheric Pressure: 860hPa~1060hPa    

Description:    
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration    
- The default boot into single-point measurement interface.   
- Aluminum alloy shell prolongs its service life.

Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.    

Startup & Shutdown:    
- Hold down the CTRL key off press the power switch button.    
- The boot state, long press (2S above) the switch button, after the release, the instrument will shut down    
- The boot state, long press (2S above) the switch button, after the release, the instrument will shut down    

Advice when Using:    
- In order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.    
- Try to use good quality RF cable and connectors.    
- Calibrated cable marked to the next may not need to calibrate and direct use.    
- Test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.    
- Measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.    
- If the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis.    

Package Included:
- 1 x PS100 Antenna Analyzer SWR Meter

 

Detail photo

 

 

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

 

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

 

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

 

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

 

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

 

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

 

 

Packing&Shipping

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

 

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery