FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line
FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line
FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line
FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line
FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line

FRP Grating Machine, FRP Molded Grating Machine, Glass fiber grating production line

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Hengshui Aoliande Trading Co., Ltd.

Business Type: Trading Company
Main Products: , , ,

Product Details

Product Information
1220 * 4920 * 38mm FRP grating mold is a non-standard model of glass steel grille equipment, as the recent car gradually into the homes of ordinary people, around the car and car beauty shop in the ascendant. FRP grille in the field of caravans to promote, making the glass car grille market really formed, expanding the FRP grating has a new field. We have designed this specification in accordance with this form of equipment, because you can also in the direction of the length of the production of 3660 and 4000 grid plate, so the mold once listed, immediately received the majority of glass steel grille manufacturers of all ages. The following technical information on the equipment described below: to readers. First, the mold forming surface size: 1220 * 4920 * 40, at the same times the production of arbitrary specifications of the card grille. For example: 1.22 * 3.66 or 1.22 * 4000 board can be produced. Second, the module specifications: the upper end: 31.1 * 31.1, the lower end: 33.1 * 33.1, the module height of 40 mm. The size of the entire module deviation is not greater than 0.08 mm. Of course, we can also adjust the size of the module according to customer requirements, here omitted 50 words, you know! Third, the module material and technology: the module selection of high-quality S45C die steel, after sawing cutting, grinding machine flat head, milling machine open oblique, grinding machine leveling, drilling, sanding chamfering, cloth wheel polishing, plating hard chrome and other 8 processes Into, which is the most attention to the module plating, to strictly accept the seventy-nine forty-nine minutes of plating, in the module surface to form 0.05-0.07 mm coating. The whole process gives us an exclusive tour of another version of a steel art tour. Fourth, the product size: Center distance: 38.1 * 38.1, height: 38 mm, product ribs thickness, the next 5mm 7 mm. Products in the square meter in the 19.5 kg, material consumption, close porcelain real. Fifth, the color: According to customer requirements for glass fiber reinforced plastic grating equipment, the general factory color for the general-purpose motor gray. Six, roof thickness: 14mm, material S45C steel, roof surface milling machine trim, large-scale sanding machine high-speed polishing. Seven, bottom plate thickness: 14mm, material Q235A, large gantry milling machine planning. 8, the trip part: the stroke of the equipment is the central part of the movement of the mold, we use 25 mm thick S45C steel plate, after milling machine precision machining to ensure that the size of strict fit, combined with eight 45 mm square steel as the support, to ensure that the whole Stroke advance and retreat, smooth operation. Cylinder size diameter 110mm, length 350mm, cylinder pillow selection of wide Q235A forged steel, super pressure. Nine, mold overall appearance: wide 1300 * long 5730 * high 850 mm. The height of the mold can be adjusted according to the grille production process selected by the customer. For example, choose a single pull the yarn customers; our mold height is generally not more than 750 mm.
Aavantages:
fast heating
strong operability
convenient installation
easy to operate and maintance
Water proof High impact strenge Fire registance Resistant to acid / alkali fumes

Our FRP molded grating production line is made of following devices: 1) FRP Molded Grating Machine 2) Mixer Storage tank 4) Hydraulic pump 5) Grinding machine 6) Water-circulating pump 7) SS hot water tank 8) Air source heating pump 9) Cooling tower We provide full set of FRP grating machines together with technology of producing if required.
Specification
No.
Mesh size(mm)
Grating panel size L*W*H(mm)
Module(mm)
1
38*38
1220*3660*38
38.5-41
2
38*38
1220*3660*25
30.5-32
3
38*38
1220*3660*25
25.5-27
4
50*50
1220*3660*50
50.5-52
5
38*38
1000*4038*38
38.5-41
6
38*38
1000*4038*25
25.5-27
Cautions
Before use the new mold clean up oil stains and other dirt inside the mold.Before use the mold please check if the screws loose or not. If loose, please fasten in time.Keep the mold slide adequate oil, prohibit knocking the I beam steel with hammer. Spray the demoulding agent three times, spray the agent after curing the last spray.After producing 3-4 grating sheets spray the demolding agent to the mold. Produce after the agent drying. In the following production please spray the demolding agent periodically according to the actual conditions.
Details Images
Our company
Hengshui Jiubo Composite Co., Ltd. (our factory) is professional manufacturer of FRP Pipe, FRP storage tank, FRP cooling tower, FRP molded products, FRP pultruded products and relative FRP production machines & technology, we have two international sales branches - Hengshui Aoliande Trading Co., Ltd. (our trade sales company) and Hengshui Gains Trade Co., Ltd, through the continuous development and introduction of professionality and technology, our company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 300 staff, annual sales of glass fiber reinforced plastic series products achieved 20,000 tons, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt, Chile, Panama, Spain, etc., and won the support and trust from new & old customers.
Certifications
FAQ
1. Q: Are you Trading Company or Manufacturing Factory? A: We are both manufacturer and trading company. We have our own factory for almost 10 years, and we have better service of overseas customers. Welcome to send your inquiry! 2. Q: How about the Delivery time? A: Normally, 10-15 days to finish the order for a 20ft container. Welcome to ask for the detailed delivery time according to your order quantity! 3. Q: How can you guarantee the product quality? A: We have the quality control system ISO9001:2015, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction before packing. 4. Q: What is about the payment terms. A: Basically, the payment terms are paypal, T/T, L/C at sight. Western Union, Alipay. 5. Q: Can you do OEM for me? A: We accept all OEM orders, just contact us and give me your design,we will offer you a reasonable price ASAP.
Related Products

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Machinery > Building Material Machinery > Other Construction Material Making Machinery
Categories
Hi~