Electrolytic cell, buy Industrial FRP Electrolytic Tank for Copper Zinc electrolysis on China Suppliers Mobile

Product Details

Product Description

Product Application

FRP electrolytic cell is widely used non-ferrous smelting industry anticorrosion equipment, it is suitable for lead, zinc, copper, Manganese, bismuth, silver etc. Wet smelting non-ferrous metal.

Glass pot with good anti-corrosive impermeability, good integrity, impact ability, weight, surface hardness, high quality finish, easy to scale and so on.

Main Features

1 good corrosion resistance and permeability
2 good overall
3 light weight
4 in table is bright and clean
5 insulation performance is good
6 the service life is long

FRP electrolytic cells 1, Guarabreed long-term impermeability,Free of Corrosion 2, Swift,Accurate and Less Costly Installation 3, Minimum Cleaning Time and Water Consumption 4, Minimum Maintenance Cost 5, Maximum Operational Safety. 6, Key Accessories integrated with cell Engineering.

Property	Intex
Compression strength	70~100MPa
Flexural strength	20~25 MPa
Young’s flexural modulus	17GPa
Shear strngth	~45MPa
Density(standard hammered)	2.25kg/m³
Volume resistance	3.4*1012Ωcm
Dielectric strength	3.6KV/mm
Thermal conductivity	1.37w/mk
Specific heat	800J/kgk()
Thermal expansion coefficient	18-20*10-6m/m/°C

Certifications

Detailed Images

Aqueous electrolytic cell

The form of aqueous electrolytic cell, can be divided into two categories, diaphragm electrolyzer and diaphragm electrolyzer.Diaphragm cell and can be divided into both to membrane (asbestos wool), ionic membrane and solid electrolyte membrane (such as beta Al2O3) form;No diaphragm cell is divided into mercury cell and oxide electrolyzer, etc.

Molten salt electrolytic cell

Much used for preparing low melting point metal, its characteristic is running at high temperatures, and should try to prevent moisture to enter, avoid hydrogen ions on the cathode reduction.

Electrolytic cell consists of a tub, anode and cathode, most of the anode with the diaphragm chamber is separated from the cathode chamber.According to the divided into aqueous electrolyte cell, molten salt electrolytic cell and three types of nonaqueous solution electrolysis cell.

When direct current through the cell, the oxidizing reaction at the interface between the anode and the solution of reduction reaction at the interface between the cathode and the solution, by making the required product.