Building Materials Rotary Drying Equipment/Building Rotary Drum Dryer/Drying Machine
Negotiable
Min.Order:1
Introduction of rotary drying equipment
The building materials rotary drying equipment, also called horizontal dryer, is a kind of drying machine used to minimize the moisture content of the material it is processing. And this rotary drum dryer can be divided into indirect heating rotary drum dryer and direct heating ratary drum dryer.
Thanks to reliable running, flexible operation, strong suitability and high handling capacity ,this rotary dryer is perfect for drying all kinds of mineral such as coal slime, gypsum, mineral powder, sludge, coal ash, iron powder, fluorite powder, mill scale, iron powder, sand, wood chip ,sawdust, chicken manure etc.
It has been extensively used in metallurgy, building material ,food, grain, chemical, coal and mining industry as well as other industries.
Model (mm) | Gradient (°) | Speed (r/min) | Power (KW) | Capacity (t/h) | Weight (t) |
ZKRDΦ600×6000 | 3-5 | 3-8 | 3 | 0.5-1.5 | 2.9 |
ZKRDΦ800×8000 | 3-5 | 3-8 | 4 | 0.8-2.0 | 3.5 |
ZKRDΦ800×10000 | 3-5 | 3-8 | 4 | 0.8-2.5 | 5.6 |
ZKRDΦ1000×10000 | 3-5 | 3-8 | 5.5 | 1.0-3.5 | 6.7 |
ZKRDΦ1200×10000 | 3-5 | 3-8 | 7.5 | 1.8-5 | 14.5 |
ZKRDΦ1200×12000 | 3-5 | 3-8 | 11 | 2-6 | 14.8 |
ZKRDΦ1500×12000 | 3-5 | 2-6 | 15 | 3.5-9 | 17.8 |
ZKRDΦ1800×12000 | 3-5 | 2-6 | 18.5 | 5-12 | 25 |
ZKRDΦ1800×14000 | 3-5 | 2-6 | 18.5 | 5-15 | 27 |
ZKRDΦ1800×20000 | 3-5 | 2-6 | 22 | 8-20 | 30 |
ZKRDΦ2000×18000 | 3-5 | 2-6 | 30 | 8-23 | 45 |
ZKRDΦ2200×18000 | 3-5 | 1.5-6 | 37 | 10-25 | 48 |
ZKRDΦ2200×20000 | 3-5 | 1.5-6 | 37 | 12-28 | 56 |
ZKRDΦ2400×20000 | 3-5 | 1.5-5 | 45 | 18-30 | 60 |
ZKRDΦ2800×2000 | 3-5 | 1.5-5 | 55 | 20-35 | 68 |
ZKRDΦ3000×20000 | 3-5 | 1.5-5 | 55 | 25-40 | 78 |
ZKRDΦ3000×25000 | 3-5 | 1.5-5 | 75 | 30-45 | 104.9 |
The Parts of rotary drying equipment
The building materials rotary drum dryer mainly consists of drum barrel, roll ring, wheel gear, lifting board, chain, reduction gears, and motor etc parts. It is matched with conveyor, dust remover and draught fan etc equipment. It has features of reasonable structure, excellent fabrication, high production, low consumption, economical & environmental etc.
1. Professionally designed for drying all kinds of materials with humidity or granularity.
2. Reasonable structure, excellent fabrication, low consumption, operating convenience.
3. The humidity will be separated from the materials by hot air-flow and changed into vapor to be discharged into the atmosphere . Then the materials would be dried .
4. High degree of mechanization , high yield , continuous operation .
5. High efficiency on heat power , uniform on dry , less time on cleaning machine .
6. Strong resistance to overload , operating smoothly and high reliability .
The materials which need to dry from the feed tank, feeding sneak into the cylinder, and copy is spiral plate to after. Materials because of the dryer tilted, on the one hand, the gravity and rotary low back end, on the other hand the material being repeatedly grabbed, copy board to top constantly raise and down again, make the material within the cylinder form uniform curtain, sufficient heat exchange with tube in the heat flow, due to the material repeatedly Yang, contains moisture by drying, gradually so as to achieve the purpose of drying.
About Us
Zhengzhou Kehua Industrial equipment Co.,Ltd is a trustworthy and specialist designer and manufacture of series rotary dryer and briquetting machine.
Zhengke service tent: Honesty first, quality foremost
Zhengke spirit: Honesty, delicate, high efficient and practical
Management principle: The development way depends on the concept and the wealth comes out of good faith.
Management belief: Establish of Zhengke brand for satisfaction of users.
Service System
Pre-sale Service
1. We will help you to choose the right model based on your materials, or
Specially designed for you
2. Design the suitable produce offer the reasonable consultation, testing your material
3. We will help to choose the most suitable machine for you.
On-Line Sale Service
1. Super & solid quality with whole line CE
2. All order will be supplied within the stipulated period
3. Standard export package or as your demand
4.24 hours online service
After-Sale Service
1. Repairing & maintenance if any problem occur in the warranty
2. Installation & clerk training
3. Provide wearing parts for whole years
Your inquiry will be answered within 24 hours, please feel free to contact us. We will give some advice to help you choose the rotary drum dryer with best price.