Six Phase Relay Protection Tester/Analyzer
This tester with standard 6 phase voltage, 6 phase current output, voltage 125V/phase, current 30A/phase, 6 phases in parallel can up to 180A. Digital Signal Processor Microcomputer. Not only test the traditional relays and protectors, but also test the modern micro computer replays, special for transformer differential protection and transfer equipments.
Technical parameter:
1.AC current source
Current range: 6x (0~30A)/phase, accuracy 0.5%.
6 phase parallel current output: 180A
Phase current working value for allowed long time: 10A
Power: 300VA/phase
Maximum output power of 6 phases in parallel: 900VA
Maximum permitted work time of 6 phases in parallel: 10S
Frequency range: 0~1000Hz; accuracy: 0.001Hz
Harmonic time: 2~20; phase: 0--360°; accuracy: 0.1°
2.DC current source
Current range: 20A / phase, power: 300VA/phase, accuracy:0.5%
3.AC voltage source
Phase voltage output:6x( 0~125V)/phase, accuracy: 0.5%
Line voltage output: 0~250V
Phase voltage / Line voltage output power: 70VA / 100VA
Frequency range: 0~1000Hz accuracy: 0.001Hz
Harmonic time: 2~20; phase: 0--360°; accuracy: 0.1°
4.DC voltage source
Phase voltage output range: 0~±150V accuracy: 0.5%
Line voltage output range: 0~±300V
Phase voltage / Line voltage output power: 90VA / 180VA
5.Switch terminal
Switch input terminals: 8 pairs
Dead contact: 1-20mA, 24V active output inside the device.
Potential flip: 0--6V DC low level
15-250V DC high level
Switch output terminals: 4 pairs, dead contact, rupturing capacity: 110V/2A, 220V/1A
6.Time measurement range
Range: 1ms-9999s; accuracy: 1ms
Reliable packaging &Prompt shipping:
Our service:
- Reply promptly in 24 hours with fluent English and professional knowledge.
- Provide best necessary spare parts at low price (some for free)
- If there is something wrong with the equipment,we will give a response and provide the solutions in 24 hours.
- Provide long term technical support and innovation upgrade guidance.
- OEM is available for TOP Products.
- Protect sales area, ideas of design and all your private information.
Contact info:
Welcome your inquiry at any time, for your service is my greatest honor!
Testers in laboratory:
Other testers:
1.Transformer oil Breakdown voltage Tester ( BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5.Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Kinematic Viscosity tester model VST-8 /model VST-2000
7. Flash point tester (open cup) model TPO-3000
8. Flash point tester (close cup) model TPC-3000
9.TAN-DELTA TESTER,10kV Capacitance and Dissipation Factor Test Set model CDEF
10. CT/PT tester model TPVA-404
11.Transformer turn ratio tester model HYG-II
12. Relaying Protection Tester model TPJB-III