Chevron conveyor belts

Chevron conveyor belts are used on slope angles up to approx. 30º for slightly rolling materials such as gravel and coal and up to approx. 40º for sticky materials such as wet sand and earth.

Property

-- For steep angle conveying with incline less than 45º

-- Allows the use of smaller pulley diameters.

-- Cleat height range from 5mm to 25mm which is suitable to convey bulk material up to 80mm lump size.

Property

-- Available in several high quality covers including abrasion, heat, fire, oil and fat resistant.

-- Chevron conveyor belts widths range from 400 up to 1200 mm

Property

 Step 3:Finished belts inspection

We have an inspection team to inspect the surface and dimension of each conveyor belt. If any problem on belt surface, we will repair at once in our factory.

Step 4: Technical data test

 We have a lab to test all raw materials and rubber compound.For each roll of conveyor belt,the lab will test the following features, and issue Quality Test Report.

Q1. Are you a manufactuer?

Yes, we mainly produce Rubber conveyor belts and Rubber v belts over 20 years.

Q2. What about the lead time?

1) 3--5 days for sample

2) 15--20 days for mass production. If urgent,we have green channel

Q3. How to pay?

1) T/T or L/C through bank account

2) Select Alibaba Trade Assurance Service

Q4. How about package?

1) Inner is packed on round rubber core with 30cm diameter and 12cmx12cm square hole
2) Outer is packed with one ply water-proof PP fabric