Application: 

The Asphalt Content/Binder Furnace with internal automatic balance is an environmentally-friendly and cost-eff ective method for the accurate determination of asphalt content. Furnace’s large capacity handles samples up to 3,500 grams.

most tests are completed in 20 to 45 minutes. Average test times from 20 mins for 6 mm aggregates, to 45 mins for 40 mm aggregates.

Ignition method reduces testing time compared to solvent testing methods and automatic operation frees technicians for other tasks. Temperature range is: 200 to 800°C. Accurate internal balance monitors weights automatically throughout ignition to within ±0.1 gram.

Easy operation simply enter sample weight, calibration factor, load the sample, and push start, when unit beeps at test end, push stop, and sign receipt.

Door safety features, such as a software-activated door lock, an automatic interlock that cuts power when door is open, full 180 degree door opening and door hinge lock eliminate harmful solvents and make operation easy. CE-Approved.

The apparatus is equipped with suitable safety systems to ensure that the furnace door is kept shut during the test and that the heating elements are deactivated any time the door is opened.

An independently controlled afterburner with exhaust fan and vent reduces emissions so low that no aspiration hood is needed. An serial port allows the apparatus to be connected to an external optional balance to capture automatically the initial weight of samples. A large, easy-to-read, back-lit digital display updates all data in realtime.

At the end of the test an alarm sounds, the door is unlocked and all the results are printed: the printer may also be programmed
to print data at minute intervals while test is in progress.

Features:

1.The combustion chamber body is made of ceramic fiber material, and the preheating time is short and the heating speed is fast.
2. Heat insulation performance is good, the chamber internal reach standard operating temperature, chamber body external temperature below 45 ℃, high safety operation, and effectively avoid the high temperature influence on the accuracy of measurement of electronic balance.
3. It has the secondary combustion function of the post-combustion chamber and the high temperature filtration and exhaust system to ensure the exhaust of the tailpipe meets the environmental requirements.
4. Automatic operation , easy to operate, just input the sample weight and calibration coefficient, load the sample, press the working button , and automatically print the data after the experiment.
5. The software is powerful and can simultaneous display asphalt content, oil stone ratio, sample loss weight and test time.
6. The touch type liquid crystal display, the microprinter printing test results.

Q: Are you trading company or manufacturer ?
A: We are the manufactory ,in this area for 20years

Q: How long is your delivery time?
A:  If the products  in stock, generally 5-10 days,.if stockout 15-20 days  ,according to the  quantity of  order.

Q: Do you provide samples ? is it free ?
A: Yes, we could offer the sample for your test , but its not free.Hope to understand the high cost of products for high quality

Q: What is your terms of payment ?
A: Payment amount<=1000USD, 100% in advance. Payment amount >=1000USD, 30% T/T in advance ,balance as the B/L copy