Application: 

Category: Bitumen and Tar, Asphalt
Sub Category: Softening Point, Bitumen and Tar, Penetration
Product Group:Asphalt Penetrometer, Bitumen Penetration Test, Penetration Test

The equipment is used to determine the penetration degree of road petroleum asphalt, polymer modified asphalt and the residual penetration degree after evaporation of liquid petroleum asphalt distillation or emulsified asphalt, calculated by 0.1mm. The standard test conditions were 25℃, 100g load and 5s penetration time.

The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.

Before the start of each test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra- bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The needle holder can easily be removed to calibrate its weight.

A water bath (UTGE-4000 or UTGE-4050) and a thermometer (IP38, ASTM 17C or 63C) required for the test should be ordered separately.

The Automatic Electronic Penetrometer is supplied complete with;
* Penetration Needle, 1 piece.
* Needle holder
* Weights of 50g and 100g
* Transfer Dish

* Sample Cup, Ø 55x35 mm, 6 pieces, stainless steel

Feature:

* Fully automatic operation. The entire test cycle (rapid approach, starting point determination, penetration and return to the initial position) is automatically performed by simply pressing the start button on the touch screen display
* Rapid approach and automatic starting point determination to eliminate any operator inaccuracy during needle position
* Penetration measurement via contactless displacement transducer, with 0.01 mm resolution
* Real time display of penetration/time curve
* 6" color touch streen display, easy to use thanks to the user friendly software
* High precision vertical movement by stepper motor
* Eight programmable reference positions for the holder assembly
* Saves time and grants first class results

1. 8 digital tube display.
2. It can be continuously tested three times and the average of the test is calculated automatically.
3. System test mode allows for sensor detection.
4. The instrument working platform can be adjusted up and down between 0 -25mm.
5. The injection rod can be manually adjusted up and down.
6. The test time can be set as 5 seconds, 15 seconds, 30 seconds, and 60 seconds.
7. Printable test results of external printer.
8, built-in heating temperature controlling system, the temperature can be set within the scope of 0 -60 ℃
9.With the industrial standard RS232C communication interface, the test can be completed through the communication interface operation instrument and the test results are read directly. 

Q: Are you trading company or manufacturer ?
A: We are the manufactory ,in this area for 20years

Q: How long is your delivery time?
A:  If the products  in stock, generally 5-10 days,.if stockout 15-20 days  ,according to the  quantity of  order.

Q: Do you provide samples ? is it free ?
A: Yes, we could offer the sample for your test , but its not free.Hope to understand the high cost of products for high quality

Q: What is your terms of payment ?
A: Payment amount<=1000USD, 100% in advance. Payment amount >=1000USD, 30% T/T in advance ,balance as the B/L copy