Application: 

The equipment is used to determine the penetration degree of road petroleum asphalt, polymer modified asphalt and the residual penetration degree after evaporation of liquid petroleum asphalt distillation or emulsified asphalt, calculated by 0.1mm. The standard test conditions were 25℃, 100g load and 5s penetration time.

Feature:

1. 8 digital tube display.
2. It can be continuously tested three times and the average of the test is calculated automatically.
3. System test mode allows for sensor detection.
4. The instrument working platform can be adjusted up and down between 0 -25mm.
5. The injection rod can be manually adjusted up and down.
6. The test time can be set as 5 seconds, 15 seconds, 30 seconds, and 60 seconds.
7. Printable test results of external printer.
8, built-in heating temperature controlling system, the temperature can be set within the scope of 0 -60 ℃
9.With the industrial standard RS232C communication interface, the test can be completed through the communication interface operation instrument and the test results are read directly. 

Q: Are you trading company or manufacturer ?
A: We are the manufactory ,in this area for 20years

Q: How long is your delivery time?
A:  If the products  in stock, generally 5-10 days,.if stockout 15-20 days  ,according to the  quantity of  order.

Q: Do you provide samples ? is it free ?
A: Yes, we could offer the sample for your test , but its not free.Hope to understand the high cost of products for high quality

Q: What is your terms of payment ?
A: Payment amount<=1000USD, 100% in advance. Payment amount >=1000USD, 30% T/T in advance ,balance as the B/L copy

If any question, pls feel free to contact us as below: 

Phone:0571-87139682