457nm 10W DPSS Blue OEM laser Module
USD $19,968 - $28,080 /Unit
Min.Order:1 Unit
Changchun New Industries Optoelectronics Tech Co., Ltd.
APPLICATION:
It is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, laser lighting show, etc.
SPECIFICAITONS:
Wavelength (nm) | 457±1 |
Output power (mW) | >3000, 4000,…, 10000 |
Transverse mode | Near TEM00 |
Operating mode | CW |
Power stability (rms, over 4 hours) | <3%, <5%, <10% |
Warm-up time (minutes) | <10 |
M2 factor | 3.0-6.0 |
Beam divergence, full angle (mrad) | <27 |
Beam diameter at the aperture (mm) | ~2. 0 |
Beam height from base plate (mm) | 41 with TEC, 31 without TEC |
Polarization ratio | >100:1 |
Pointing stability after warm-up (mrad) | <0.05 |
Operating temperature (°C) | 22.5+/-2.5 |
Pins information | A3. positive of diode; A1. negative of diode |
Modulation option | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option |
Expected lifetime (hours) | 10000 |
Warranty time | The warranty is 3 months, excluding the LD failure. |
Blue laser
Blue Laser
Contact Us
Company Information
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and diode laser systems. Our products include green laser, blue laser, yellow laser, red laser, RGB laser, infrared laser, UV laser, single longitudinal mode laser and Q-switched laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE, RoHS and JQA certified.
CNI also provides laser components and accessories, we aim to offer customers complete laser solutions for all solid state lasers, diode lasers, laser marking system with our most convenient and rapid service.
Certificates