532nm 8W Green laser
USD $10,999 - $15,499 /Unit
Min.Order:1 Unit
Changchun New Industries Optoelectronics Tech Co., Ltd.
APPLICATION:
It'sis widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, laser lighting show, etc.
OEM-W-532 5~18W 532nm Green laser module
SPECIFICATION:
Wavelength (nm) | 532±1 | |
Model | OEM-SW | OEM-W |
Output power (mW) | >5000, 6000…, 9000 | 10000, …, 18000 |
Transverse mode | Near TEM00 | |
Operating mode | CW | |
Power stability (rms, over 4 hours) | <1%, <3%, <5%, <10% | |
Warm-up time (minutes) | <10 | |
M2 factor | 3.0-6.0 | |
Beam divergence, full angle (mrad) | <17 | |
Beam diameter at the aperture (mm) | ~2. 0 | |
Beam height from base plate (mm) | 34 | |
Polarization ratio | >100:1 | |
Pointing stability after warm-up (mrad) | <0.05 | |
Operating temperature (°C) | 22.5+/-2.5 | |
Modulation option | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option | |
Expected lifetime (hours) | 10000 | |
Warranty time | The warranty is 3 months, excluding the LD failure. |
15W green laser
Company Information
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and diode laser systems. Our products include green laser, blue laser, yellow laser, red laser, RGB laser, infrared laser, UV laser, single longitudinal mode laser and Q-switched laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE, RoHS and JQA certified.
CNI also provides laser components and accessories, we aim to offer customers complete laser solutions for all solid state lasers, diode lasers, laser marking system with our most convenient and rapid service.
Certificates