Main Products: Mass Spectrometer ,Environmental Analyser
CNI 532nm 2w green laser
USD $2,435 - $3,380 /Unit
Min.Order:1 Unit
Quick Details View All >
Changchun New Industries Optoelectronics Tech Co., Ltd.
Business Type: Trading CompanyMain Products: Mass Spectrometer ,Environmental AnalyserProduct Details
CNI 532nm 2w 3W green laser
APPLICATION:
It's easy to be installed in customers equipment.
SPECIFICAION:
Wavelength (nm) | 532±1 | ||||
Output power (mW) | >1, 5, 10, …, 450 | 500, 550, …, 1400 | 1500, …, 2000 | 2100, …, 3000 | |
Transverse mode | TEM00 | Near TEM00 | |||
Operating mode | CW | ||||
Power stability (rms, over 4 hours) at 25℃ | <1%, <3%, <5% | <3%, <5%, 10% | |||
Warm-up time (minutes) | <10 | ||||
M2 factor | <1.2 | <1.2 | <3.0 | <3.0 | |
Beam divergence, full angle (mrad) | <1.2 | ||||
Beam diameter at the aperture (mm) | 3-4 | ||||
Beam height from base plate (mm) | 25 | ||||
Operating temperature (℃) | 25+/-2 | ||||
M2 factor | 0-2.5 | 0-5.5 | 0-5.5 | 0-8 | |
Operating voltage of Diode(V) | ~2.0 | ||||
Pins information | 11/12:positive of diode; 1/2: negative of diode | 5/6/7/8: positive of diode; 12/13/14/15: negative of diode | |||
Power supply (optional) | PSU-III-OEM (5VDC) | PSU-OEM-F (two channels 6 & 12V) | |||
TTL modulation/ Analog modulation | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option | ||||
Expected lifetime (hours) | 5000 | ||||
Warranty time | The warranty is 3 months, excluding the LD failure. | ||||
OEM-F-532
136(L)×58(W) ×45(H) mm3, 0.74kg
F-532-HS
PSU-III-OEM (1-450mW) Accessories
100 (L) ×62(W) ×56 (H) mm3, 0.2kg 120(L)×60(W) ×37(H) mm3,100-240VAC
PSU-OEM-F(1-3000mW) Accessories
100(L)×76(W) ×27(H) mm3, 0.10 kg 160(L)×86.2(W) ×34.5(H) mm3 100-240VAC
Company Information
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and diode laser systems. Our products include green laser, blue laser, yellow laser, red laser, RGB laser, infrared laser, UV laser, single longitudinal mode laser and Q-switched laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE, RoHS and JQA certified.
CNI also provides laser components and accessories, we aim to offer customers complete laser solutions for all solid state lasers, diode lasers, laser marking system with our most convenient and rapid service.
Certificates
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln