Type:               JL5-E2.5D2A70A/WUABT1

 Motor Volt:           24VDC

 Motor power:        2KW

 Rated speed:        2500RPM

 Displacement:       2.5ml/r

 System Pressure:  16MPa

Tank capacity:       11L

specification:

This 24volt hydraulic power unit for tail lift / lift gate / truck rear lift equipped with two zero leakage double-check solenoid valves, this power unit has two independent circuits for the lifting cylinder and rotating cylinder of tailgate of electrical garbage truck. The lowering speed of the cylinders is regulated by the pressure compensated flow valve in the return line. 

Usage:

This 24volt hydraulic power unit for tail lift / lift gate / truck rear lift can also be used in those applications where two separated hydraulic circuits are needed such as double scissors lift, doublepallet mover etc.

Our power units mianly used in forklift ,meadical care equipment,pallet truck ,manual electric stacker,electric stacker,electric work paltform,aerial order picker,car lift,double-scissors lift,tail gate for car lift,basketball stands power units,power units for tyre changer,lift table,tipper trailer,snow removal truck,excavator for GOLF,hydraulic dock leveler, Sanitation truck

Advantage:

• Low noise
• Small size 
• Low noise
• High efficiency
• Long life
• Convenient for mounting
• 100% copper wire
• More than 20 year's manufacture experience

Drawing:

 Special notes:

1.The duty of 24volt hydraulic power unit for tail lift / lift gate / truck rear lift is S3, i.e., 30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the oil shoud be 15~68 cst, and the oil should be clean and free of impurities, N46 hydraulic oil is recommended
4.This power unit should be mounted vertically.
5.Check the oil level in the tank after the initial run of the power unit.
6.Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.

Remark:

1.Please feel free to contact me  consult for the different pump displacement, motor power or tank capacity of 24volt hydraulic power unit for tail lift / lift gate / truck rear lift.

2.The manual override function is available on request. 

Application:

For more choices and informations of 24volt hydraulic power unit for tail lift / lift gate / truck rear lift, please see our websige:

 https://hydraulicmotor.en.china.cn/

Send me the parameters , we will be pleasure to customize for you.  

Inside packing : air bubble pad or plastic bag with corrugated carton with required lables

Outside packing : pallet and lable as per your requirement

Of course, any special package requirements are depend on your esteemed company.

1.Sample service: samples can provide preferential.
2.customized services: a variety of power units can be customized according to customer demand.
3. aftermarket service: according to consumer requirements, technical guidance on the use and other aspects. In case of quality problems under normal use, free replacement within one year of free maintenance for life.

Our factory was established in 1996, professional in forklift motors, hydraulic power unit motors.

We have nearly 20 years' manufacturing experience with a strong team of 30 engineers for development and research. The motors' annual output has been more than 200,000 sets.

So far, we are the only designated OEM hydraulic power unit motor supplier in China for US WAI Company, OEM forklift motor supplier for Korea SOOSUNG. Also, we cooperated Korea KOPACK and HELI in China.

Our factory will attend PTC ASIA 2017 in shanghai ,  our booth No.E3, G3-2 ,welcome to our booth!

We also attend the Canton fair and Hannover messe ,pls feel free to contact us if you are interested in our products, we will bring to the booth ~

For more information about our company:
click here:
Transaction history

Trade shows

Trade capacity

Company information

Home

For more choices and informations of Jinle hydraulic power units , please see our website:

 https://hydraulicmotor.en.china.cn/

Customized production and OEM are all available.

Send me the parameters or samples of hydraulic dc motor, we will be pleasure to customize for you.

Know more about our products, pls click following pic:

Tipper trailer power units                                             Power units for lift table                   

Power units for medical care equipment                      Power units for aerial order picker

 Q: Do you accept OEM manufacturing?
A: Yes! We do accept OEM manufacturing. You could give us your samples or drawings.

Q: Can we design our own package or print our own logo?
A: Yes! You could! Package will be acording to your requirements?

Q: Could we get samples?
A: Yes! Definitly! The samples will be sent to you preferentially.

Q: How much time about the mass production?
A: The lead time of mass production will depend on quantity, production and so on.

Q: Could I customize our products in your factory?
A: Customization is available. You can send me your specifications and drawings.