General Description
Consisting of high pressure gear pump, DC motor, multifunctional manifold, valve, tank, etc. This power unit can be widely used in the industry logistic devices such as minifork lift. The lowering movement is controlled by the solenoid valve with the sped controlled by the balance valve.

Special notes

1. The duty of this power unit is S3. ie: 30 seconds on and 270s off.

2. Clean all the hydraulic parts concemed before mounting the power unit.

3. Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of ompurities. N46 hydraulic oil is recommended.

4. This power unit should be mounted horizontal.

5. Check the oil level in the tank after the first start of the power unit.

6. Oil changing is required after the initial 100 operation hours afterwards once every 3000 hours.