hydraulic power unit/ pack

220v 2.2kw for double-scissors lift 2850rpm

1.Specification:

This hydraulic power unit/pack 220v 2.2kw for double-scissors lift 2850rpm is equiped with the zero leakage double-check solenoid valves,this power unit fulfils the complete separation of the two independent circuits ,which are respectively for the main platform and subordinate platform of the double scissors lift .By increasing the number of the solenoid valves ,it is easy to get more  independent circuits which are used to control the corresponding cylinders

2.Usage:

This hydraulic power unit/pack 220v 2.2kw for double-scissors lift 2850rpm with high pressure gear pump are widely used in tail gate for car lift of flying wing car, LED car ,Mobile stage car.

3.Advantage:

• Low noise
• High efficiency
• Long life
• Convenient for mounting
• 100% copper wire
• More than 20 year's manufacture experience

4.Drawing:

 5.Special notes:

   1.The duty of hydraulic power unit/pack 220v 2.2kw for double-scissors lift 2850rpm with high pressure gear pump is S3, i.e., 30 seconds on and 270 seconds off.
   2.Clean all the hydraulic parts concerned before mounting the power unit.
   3.Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities. N46 hydraulic oil is recommended.
   4.Change the oil after the first 100 hours of running the power unit, then change the oil every 3000 hours.
   5.The power unit should be mounted horizontally.

6.Details:

For more details about hydraulic power unit/pack 220v 2.2kw for double-scissors lift 2850rpm with high pressure gear pump ,pls feel free to contact me :

7.Application:

We are a manufacturer of dc motor and power units more than 21 years,coorporated with Hidros in turkey and KOPACK , Hydro-tek , all of our products have passed CE and ISO9001:2000 certificates.
Our products can mainly for fixed boarding bridge, dump truck, electric stacker, van wing door, lift platform, vehicle tailboard, car lift, forklift etc.

Our philosophy is to provide our clients with a wide chioce of quality products and unprecedented services. We assure our clients of a mutually beneficial relationship as we look forward to developing a long term strategic partnership with your esteemed organization.

Custom service is available, let me know following parameters ,we will custom for you:
 1.Voltage   
 2.motor power  
 3.single action or double action  
 4.with or without pressure holding 
 5.Single oil cylinder or multiple oil cylinder  
 6.gear pump displacement mL/r       
 7.flow rate L/min       
 8.Pressure( Mpa)    
 9.oil tank capacity     
10.vertical or horizontal   
11.square or round      
12. voltage of  solenoid valve

Packing Details  :  We pay high attention to the 12v 1.6kw 2500rpm dc motor on hydraulic power pack unit used for forklift motor packaging, adopt poly foam packing and then pack them to plywood case to protect dc motor, this series of complete packing enable you receive good products.

 Delivery Details :  15 days after order 

1.Sample service: samples can provide preferential.
2.Customized service: a variety of power units can be customized according to customer demand.
3.Aftermarket service: according to consumer requirements, technical guidance on the use and other aspects. In case of quality problems under normal use, free replacement within one year of free maintenance for life.

Our factory was established in 1996, professional in hydraulic dc motors, hydraulic power pack units, hydraulic cylinders, solenoid valves etc. They are widely used for forklift, vehicle tailboard, lift table, electric stacker, wing plate and other hydraulic equipment etc.

We have nearly 20 years' manufacturing experience with a strong team of 30 engineers for research and development. The motors' annual output has been more than 200,000 sets.

So far, we are the only designated OEM hydraulic power unit motor supplier in China for US WAI Company, OEM forklift motor supplier for Korea SOOSUNG. Also, we cooperated Korea KOPACK, Turkey Hidros and HELI in China.

We have been attentively persisting in manufacturing hydraulic dc motors for 20 years.

Below is the information about Jinle Factory transactions conducted via . If you require further details regarding the transaction data, please click on the below picture.

We have passed Certificate of Compliance(CE) and Quality Management System(ISO9001:2000). Click on the below picture for certification details.

The Jinle staff are always take the company development as self task. With years of effort, Jinle hydraulic dc motors have acheived "private techinology enterprises in Jiangsu province","Jiangsu Province integrity rights shuangyou demonstration unit" awards. Now we are Chinease quality service honor AAA demonstration unit .

Our factory will attend PTC ASIA 2017 in shanghai ,  our booth No.E3, G3-2 ,welcome to our booth!

We also attend the Canton fair and Hannover messe ,pls feel free to contact us if you are interested in our products, we will bring to the booth ~                                                                               

Know more about our company by watch a small redio: click here:

For more information about transcation history:
click here

For more choices and informations of Jinle hydraulic dc motors, please see our website:

 https://hydraulicmotor.en./

Customized production and OEM are all available.

Send me the parameters or samples of hydraulic dc motor, we will be pleasure to customize for you.

Click the picture for more details:

 Power units for tail gatefor car lift                                             Power units for car lift

 Power units for double -scissors lift                                          Power units for aerial order picker

 Q: Do you accept OEM manufacturing?
A: Yes! We do accept OEM manufacturing. You could give us your samples or drawings.

Q: Can we design our own package or print our own logo?
A: Yes! You could! Package will be acording to your requirements?

Q: Could we get samples?
A: Yes! Definitly! The samples will be sent to you preferentially.

Q: How much time about the mass production?
A: The lead time of mass production will depend on quantity, production and so on.

Q: Could I customize our products in your factory?
A: Customization is available. You can send me your specifications and drawings.

If you have any problems about power units and hydraulic dc motor ,welcome to contact us, we will try our best to solve your problems!

WINNIE : WHATSAPP/WECHAT/SKYPE : +86 150 6185 0912