Archon DH30 & WH36II Diving Light

Model：DH30II Canister Diving Light

Bulb：3*CREE White LED (color temperature：6500K)

Max brightness level ： 3600 lumens

Output levels：high>low>strobe

Runtime：high 200min， low450min， strobe 500min

Reflector：glossy aluminum reflector

8mm polycarbonate lens

Body material：durable aircraft-grade aluminum

Angle of Light beam：8°hotspot， 110°periphery

Light head with a handheld bracket and a green luminous O-ring

Surface treatment：premium type III hard-anodizing 

Color：Black light with orange cable

Battery：3*26650 Li-ion battery(with BMS)

With battery over-discharging protection， polarity reversing protection

Operation voltage：14V to 9V

Waterproof：up to 100 Meters 

Dimensions：Light head：91mm(length) *60mm(dia.)

canister：265mm(length)*31mm(dia.)

Cable length ：1. 2 Meters

Weight in air：approx.866g.without batteries) ， approx.1157g.(with batteries]

Weight in water：approx.580g.[with batteries)

LOW BATTERY WARNING

The Light flashes 3 times if the power capacity reaches 10-5%； it repeats after 5 seconds， and then switches to the lower brightness. The Light switches off automatically when the power capacity is less than 5%， to prevent over-discharging.

BATTERY INSTALLATION：

1.Hold the canister with its cover pointing upward， unscrew the cover.

2.Remove used battery if there is any， and putin the fresh ones per polarity signs.

3.Screw the cover down.Do not overtighten to break the O-ring.

BATTERY CHARGING：

1.Please keep the charger away from the flammable or explosive material， and plug

it in the power socket； the charger's indicator light is green in the free load status.

2.Put the battery in the slot of the charger. The charger's indicator Light is red if the + charging is in process； and it turns green after the charging is completed.

3.Please carryout charging under monitoring， and unplug the charger when it is

finished.

MODES CHANGING：

When the light is off， long press the button switch and hold it for two seconds to

turn on the light to hight brightness level； then， successively click the switch

cycle through high， low， and strobe. When the light is on， long press the button

switch and hold it for two seconds to turnoff the light at any brightness level.