Name: Pneumatic floating fender used for ship and boat
Brand: FLORESCENCE
Availability: InStock

Product Details

Pneumatic floating fender used for ship and boat 
Our floating pneumatic fender is made by an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber,
vulcanized together firmly. The outer rubber of Pneumatic Inflatable Rubber Fender is used to protect the cable and inner rubber from wear and other external forces. This rubber compound has sufficient tensile and tear resistance, which can withstand anticipated weather conditions and harsh service.
Besides, the reinforcement synthetic-tyre-cord layer is strong enough to maintain the internal air pressure of the fender and the inner rubber layer seals the pressurized air inside the fender. What's more, the fenders of diameter 2500mm and larger are equipped with safety valve for releasing excess internal pressure when they are over-compressed accidentally.

Features:

Low surface pressure: with low reaction and High Energy Absorption Rate.
Low transportation costs: pneumatic fenders can be deflated and folded for transport.
Easy operation: Ease of handling and good buoyancy, with easy installation & maintenance free.
Excellent performance: It is with exceptional Compressibility and elasticity.
Application: this Rubber Fender is apt with the Large and small tides, which is suitable for areas with tidal differences.

Different types of floating pneumatic fender

1. Tyre-net type
Tyre-net type floating pneumatic fenders are covered with a chain net, wire net or fiber net for small size fenders. Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.

2. Sling type
Sling-type floating pneumatic fenders have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.

Specification

Production Name	Floating pneumatic fender
Size range	Diameter: 0.3-3.3m Length:0.6-6.5m Initial pressure: 50KPA or 80KPA
Regular size	D1.2L2.0m, D1.5L3.0m, D2.0L3.5m, D2.5L5.5m, D3.3L6.5m
Application	Ship to ship transfer, ship to berthing operation, ship to dock

Advantages of floating pneumatic fender

Choose reinforce synthetic-tire -cord layers
Floating on the surface of the water, ship swaying can apply
High energy absorption and low reaction force
Good adaptability to tilt in contact
No mould valcanization and attach surrounding molding process

Application

Ship to ship transfers at seas.
Double banking operation as well as vessel to berth at dock/jetty.
Oil & gas tankers.
Temporary and permanent installations.
Rapid response and emergencies.
Liquid cargo and naval defense vessels.

Use attention of floating pneumatic fender

*Frequently check whether the fender body is damaged and whether the pressure is normal,and the valve core must be replaced every six moths
*The steel wire should wrap the rubber pipe,when trying steel wire to pneumatic rubber fender in case the fender is stabbed
*The surface or subject next to the pneumatic rubber fender can’t be hard and sharp-pointed in case the pneumatic rubber fender is stabbed
*The accessories and jigs nuts can’t be loose when testing the internal pressure
*The rope net should be reliable,the steel wire used for hanging metal parts and the hook link can’t be tied in disorder.

How to install floating pneumatic fenders?

Loading and packing

Different sizes of floating pneumatic fenders