*Similar Grade

*Product Forms

Pipe, Tube, Sheet, Strip, Plate, Round Bar, Flat Bar, Forgings, Hexagon, Wire

*Brief

Hastelloy C4 is a nickel-chromium-molybdenum alloy which has improved thermal stability. In this alloy, the tungsten was totally omitted and the iron content was reduced to approximately 1%. The alloy also contains approximately 0.3% Ti. Outstanding high-temperature stability; exhibits good ductility and corrosion resistance after long-time aging at 650 to 1040 °C (1200–1900 °F). Resists formation of grain-boundary precipitates in weld heat-affected zones, and is suitable for most chemical process applications in the as-welded condition. Has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to 1040 °C (1900 °F). Hastelloy C4 has exceptional resistance to a variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine, and chlorine-contaminated media (organic and inorganic, dry chlorine, formic and acetic acids, acetic anhydride, seawater, and brine). The general corrosion resistance of Alloy C276 and Alloy C4 was essentially the same in many corrosive environments, except that in strongly reducing media like hydrochloric acid, Alloy C276 was better; but in highly oxidizing media, the opposite was true, that is, Alloy C4 was better. Alloy C4 offers good corrosion resistance to a wide variety of media including organic acids and acid chloride solutions. This alloy has found greater acceptance in European countries in contrast to Alloy C276, which is more widely used and accepted in the United States.

*Chemical Composition,%

*Typical Physical & Mechanical Property(Annealed)

*Specification

*Feature

1. Hastelloy C-4 attains high temperature stability

2. Good ductility & excellent corrosion resistance up to 1900^oF

3. Suitable for use in chemical processing media

4. Prevents stress corrosion cracking and oxidation

*Application

1. Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings

2. Flue gas desulfurization systems

3. Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping

4. Sour gas wells

5. Pulp and paper production, Waste treatment

6. Pharmaceutical and food processing equipment