Main Features

The AHU is designed for cleanroom / pharmaceutical/ data center.ect

• Supply Precious Temp and RH% Clean Air

• Free blow air volume (6000CMH), cooling capacity (30kW), heating capacity (18kW) and humidifying capacity (10kg/h)

• Built-in Microprocessor Control Console with operation data display (compatible with wireless control)

• Operation efficiency and energy saving

• Outstanding reliability and performance

• Configured flexibly, numerous options for customization

• HVACR and Industrial Clean Air application

Frame

• Penta-post extra heavy gauge aluminium profiles and strong  fiber-reinforced PE corner connection forming the structural  frame
• superior mechanical strength and rigidity to the unit frame and  to prevent any buckling or deformation
• Thermal bridge free design, the profiles filled with polyurethane   foam for insulation
• Anodizing surface treatment for profiles, corrosion-resistant
• Stainless steel frame available

Casing Panel and Insulation

• Double skin construction is provided by sandwich type panels  comprising inner and outer painted steel skins and  polyurethane foam with minimum 48kg/m3 density, providing a  good thermal and acoustical performance
• The gasket liner between the panels and frame ensures the air   leakage rate to comply with GB/T 14294 clean air conditioning  requirement
• The factory painted steel sheet covered with 6 insulation  coatings, complies to 500h salt spray testing, showing an  excellent corrosion protection performance

High Efficiency Cooling and Heating Coil

• All coils calculation and selection is done by selection software  to match the required conditions
• Large coil face area ensures maximum heat transfer rate
• All coils tested at 30bar pressure underwater 24 hours
• Various corrosion resistance coils for option:
   -Cooper tube with cooper fins coil
   -Epoxy coated fins coil
   -Electrophoresis fins coil
   -Heresite coated coil

Safety PTC Electric Heating

•Constant temperature heating
•Virtually unlimited life
•Low electricity consumption and very low in cost
•No electrical noise
•The higher the temperature, the more electricity efficient
•Avoid burning when in contact with combustible materials

Electrode Humidifier

• Cylinder monitor system ensures more efficiency, better  energy saving and stable result
• Drainage pump ensures the humidifying process accurate and  stable
• Clog protection system ensures to avoid water overflow
• Water temperature control system makes sure the drainage  pipe won't be damaged by hot water
• Anti-electric leakage system makes operation and  maintenance safe and secure

Famous Brand Blower and Motor

• Fan selection based on the air flow and air static requirement  is done by fan selection software
• Direct driven/ belt driven, forward curve/ backward curve  centrifugal fans, and EC fan is available for option
• Nicotra, Kruger, Deton, Yilida is offered as option
• Motor is TEFC type, class F insulation and IP54 or IP55  protection, energy saving and stable operation
• Mounted on an adjustable slide for belt tension adjustment
• Variable frequency drive (VFD) motor is available
• Siemens, ABB, WEG, TECO is offered as option

Vibration Eliminator

• To reduce the transmission of vibration and noise, fan and  motor are installed on an independent complete base frame

• The complete base frame is isolated by deflection type spring  isolators

• This unique structure not only reduce the vibration and noise,  but also protect fan and motor during transportation

Stainless Steel Drain Pan

• Slop type design, no drain water carryover and keep the pan dry
• Avoid the micro-organisms growth inside the drain pan

Antimicrobial Drain Pan is offered as option
• SteriTouch technology Drip Pan Coating
• Antimicrobial surface
• Good exterior durability and corrosion resistance
• Excellent adhesion
• Non-toxic, comply with BS476 part 7

Telewin supplies Air Conditioning products to oversea and domestic markets

•Stable and timely supply guaranteed

•Export standard paper carton and wooden case packing available

•Customized packing acceptable

FAQ

1.Are you a factory?
--- Yes, we are a professional AHU manufacturer for more than 20 years.

2.How do you check the goods?
--- We inspect all the materials when they arrive, and have spot inspection during production process. All goods will be tested and double inspected before delivery, providing 100% guarantee for clients.

3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, ESP or TSP, cooling capacity, heating capacity or application for our team to design the suitable unit for you.

4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 1 hour during the working time. All messages will be replied whenever they comes.

5.What's your payment terms?
--- Usually we accept T/T or LC. 30% deposit. Other payment terms can be discussed when orders confirmed.

6.Where is your factory Located? How can I visit there?
--- We located in Foshan, Guangdong Province, which is near Guangzhou Baiyun International Airport and Guangzhou South Railway Station. We can pick you up from the airport or railway station. You are warmly welcome to visit us!

7.Do you provide OEM service?
--- Yes! We provide OEM and ODM service.

8.What's the lead time for your goods?
--- Normally 25 workdays. For urgent orders, we can make special arrangement to fulfill your request.