Introduction:

The 8.5′′ vacuum tube furnace with sliding flange GSL-1100X-8.5-SR is a three-zone slide tube vacuum tube furnace, which can be introduced into the mixed gas for low-pressure chemical vapor deposition. The machine can be in different atmospheres, at maximum 6 "A variety of thin films are grown on the substrate."

Features:

1, double shell, with a circulating air cooling system. The furnace body is made of high-purity alumina polycrystalline fiber insulation material, which is environmentally friendly and energy-saving. The housing temperature is <70°C.

2, slide rail flange structure, easy to take samples.

3, with double K-type thermocouple and an additional temperature calibration detection system.

4, using PID controller, you can set 30 paragraphs of heating and cooling procedures.

5. The right flange is equipped with a quartz tube block to block heat radiation; the left flange is provided with 4 frosted quartz blocks to prevent heat radiation.

6, has passed CE certification.

Technical Parameters:

Power Supply: Single Phase 220V 8KW

Quartz tube: outer diameter Ø216mm, inner diameter Ø208mm, length 1300mm

Heating element: Ni-Cr-Al resistance wire

Heating area: 600mm

Constant temperature area: 200mm

Working temperature: up to 1100°C, continuous work 400°C-1000°C

Maximum cooling rate: 10°C/min

Temperature control accuracy: ±1°C

Vacuum degree: 10-2torr (mechanical pump), 10-5torr (molecular pump)

Thermocouple detection vacuum interface: KF-25 ports: 1

Intake port: 5 way, precision stainless steel needle valve seal

Furnace body: 1300mm×680mm×920mm

Slide rail: 600mm

Size: 1780mm × 1780mm × 1650mm;

Weight: 354kg

Standard accessories

Quartz tube plugging: 1

KF-25 vacuum flapper valve: 1

KF-40 stainless steel bellows: 1