Introduction:

1200°C single-tube sliding rapid heating and cooling furnace OTF-1200X-80SL is equipped with a pair of slide rails at the bottom, which can move the furnace body manually. The maximum working temperature reaches 1200°C. The heating and cooling rate can reach 10 in a vacuum or inert gas environment. °C/s. To obtain the fastest heating, the furnace can be pre-heated to the set temperature and then the furnace moved to the sample location; to obtain the fastest cooling, the furnace can be moved after heating the sample to the other end, this machine is ideal for low-cost rapid heat treatment equipment.

 This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh.

Features

1, double shell, with air cooling system, shell surface temperature <60 °C.

2. The surface of the inner furnace is coated with imported high-temperature alumina coating, which can increase the heating efficiency of the equipment and extend the service life of the equipment.

3. There is a slide rail at the bottom, and the furnace body can be manually slid from one end to the other so as to achieve rapid temperature rise and cooling.

4. Both ends of the furnace tube are installed with a vacuum flange. One end flange can be inserted with a 1/4" diameter thermocouple to monitor the actual temperature inside the tube. The other end flange is equipped with a number of

Vacuum gauge.

5, PID controller, you can set 30 paragraphs of heating and cooling procedures, and with overheating protection.

6, has passed CE certification.

Technical Parameters

Power Supply: Single Phase 208V-240V AC 50Hz/60Hz 2.5KW

Quartz tube: Ø80mm, ID Ø75mm, length 1400mm

Heating area: 440mm

Constant temperature area: 120mm

Working temperature: maximum temperature 1200°C(<1h), continuous temperature 1100°C

Temperature control accuracy: ±1°C

Heating and cooling speed:

Heating rate Cooling rate

15°C/s (RT-150°C) 15°C/s (1000-950°C)

10°C/s (150°C-250°C) 10°C/s (950°C-900°C)

7°C/s(250°C-350°C) 7°C/s(900°C-850°C)

4°C/s (350°C-500°C) 4°C/s (850°C-750°C)

3°C/s (350°C-550°C) 2°C/s (750°C-600°C)

2°C/s (550°C-650°C) 1.5°C/s (600°C-500°C)

1°C/s (650°C-800°C) 1°C/s (500°C-400°C)

0.5°C/s (800°C-1000°C) 0.5°C/s (400°C-300°C)

Vacuum degree: 10-3torr (mechanical pump), 10-5torr (molecular pump)

Thermocouple: K-type (one in the furnace, control the temperature in the furnace, and the other in the furnace tube, used to detect the actual temperature of the sample)

Slides: Cr-plated steel tubes, 1200mm long

Size: furnace body 550mm × 380mm × 520mm, furnace body and slide 1500mm × 380mm × 620mm;

Weight: 80kg

Optional accessories:

Anti-corrosion digital vacuum display meter