Introduction:

 TC3000E thermal conductivity meter is a portable thermal conductivity meter developed by our company specially for mobile measurement needs, such as outdoor testing, field exploration and other samples not easily brought to the laboratory to detect the situation, can easily bring the instrument to the sample Before, anytime, anywhere to ensure the user's measurement needs, and has the precision of the laboratory precision instrument measurement performance. The portable thermal conductivity meter TC3000E can be better qualified for continuously changing test sites, inconvenient sample replacement positions, or samples that need to be measured immediately after preparation, which greatly expands the scope and application of precision instruments.

      Compared with the TC3000 series thermal conductivity meter for precision measurement in the laboratory, the TC3000E has the advantages of cost-effectiveness, compact size, and ease of carrying, and at the same time retains the advantages of wide application, rapid measurement, and accurate measurement of the TC3000 series thermal conductivity meter.

      TC3000E can still be widely used in insulation materials, thermal plastic, rubber, plastics, ceramics, soil, rock and other pure materials, composite materials in different states, such as block, sheet, powder, paste or gel Thermal conductivity measurement, in addition to laboratory testing, can provide great convenience for thermal conductivity measurement in field testing, field exploration, product quality inspection and production control.

Features:

1. Cost-effective: Compared to the laboratory dedicated TC3000 series thermal conductivity meter, TC3000E hot-wire method thermal conductivity meter lower prices, while continuing the hot line method is widely used, fast measurement, accurate measurement results, etc., have higher The cost-effectiveness can better meet the requirements of the production, quality inspection, and research and development of chemical, building materials, thermal plastics, and other industries;

2. Portable: The TC3000E has a lightweight appearance and is more convenient to carry and move. It not only can achieve the traditional laboratory measurement that brings the sample to the instrument, but also can achieve the on-site measurement that brings the instrument to the front of the sample.

3. Wide application scope:

      Sample types: Measurable insulation materials, rubber, plastics, thermal plastic, ceramics, soil, rocks, etc.;

      Sample status: Can measure solids, pastes, powders, colloids and other samples under different conditions;

      Application environment: It can realize on-site inspection, laboratory testing, teaching demonstration, on-line testing, etc.

      Non-destructive testing: especially suitable for soil, wood, biomass and other moisture-containing materials;

4. Fast measurement: A typical set of measurement process, from the preparation of the test to the final acquisition of data, generally only takes 2 to 3 minutes;

      In the premise that the sample and the sensor are connected and the instrument is connected, the automatic multiple acquisition function in the software can also be used. The user may not have to keep the instrument beside the instrument and only need to export the data after the test is finished. Great savings in user testing time and effort.

5. Accurate measurement: Based on the principle of the hot wire method, the TC3000E thermal conductivity meter continues the accurate measurement of the TC3000 series; for the standard samples, such as organic glass and borosilicate glass, the measurement accuracy and repeatability of the TC3000E are better than 2%; for the surface Most of the flat samples, such as rubber, plastics, ceramics, insulation materials, etc., have accuracy and repeatability within 3%.

Technical Parameters :

Measuring principle: Transient hot-wire method

Measurement range: 0.001~10.0 W/(m•K)

Resolution: 0.0005 W/(m•K)

Accuracy: ± 3 %

Repeatability: ± 3 %

Temperature range: Room temperature

Measurement time: 1~20 seconds

Sample shape: block, sheet, paste, powder, granules, colloid, liquid can be (circular, square, irregular shape, unlimited shape)

Sample size: Thickness ≥ 0.3mm, side length ≥ 25mm, no need to bring the size into the calculation

Data Transmission: USB

Dimensions: 350×250×150 (length×width×height, mm)

Operating System: Win10/ Win8/ Win7

Reference Standard: ASTM C1113 ASTM D5930 GB/T 10297 GB/T 11205

Dear customer, 

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history . 

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science. 

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system. 

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba 

We firmly believe that science and technology is no boundaries 

Our mission is to make every effort to contribute to all humanity.