Name: Ultra Filtration Uf Filter Pp Hollow Fiber Membrane
Brand: TORAY
Availability: InStock

Product Details

Product Category

PRODUCT
CATEGORIES

Sludge dewatering machine

Belt filter press

Screw filter press

Powder dosing system

Sludge drying machine

Pure water system

Chemical dosing pump

Industrial liquid mixer

→ View all

Screw filter press

Powder dosing system

Industrial RO water system

Sludge drying machine

Product Description

Ultra Filtration Uf Filter Pp Hollow Fiber Membrane

Toray Pressurized pp hollow fiber membrane Modules
The material of Toray's Hollow Fiber (HF) Pressurized Ultrafiltration (UF) modules is PVDF (Polyvinylidene fluoride). This best grade HF membrane material provides high mechanical strength and chemical resistance (oxidation, pH).

The filtration mode is an Outside – in & Dead-End Filtration. This filtration method offers simple operating control and low energy consumption.

The possibility of the filtration of Ground Water, Surface Water, Sewage Secondary Effluent and Seawater allows a wide range of different applications:
Drinking Water Production
Tertiary Treatment of Sewage Water
RO Pretreatment in Seawater Desalination
Industrial Water Production
Reuse of Industrial Waste Water

Toray's Pressurized Series have been certified as an acceptable filtration technology for compliance with the following Certificates.
♦ AMST (Association of Membrane Separation Technology of Japan)
♦ ANSI / NSF STANDARD 61
♦ CDPH (California Department of Public Health - Drinking Water Program)
♦ KWWA (Korea Water and Wastewater Works Association)

pp hollow fiber membrane Main Product List

Series		HFU Series		HSU Series
Filtration Method		Pressured		Submerged
Model		HFU-2020N	HFU-1020N	HSU-1515
Molecular Weight Cut Off		150,000 Da
Nominal Pore Size		0.01 micrometer
Membrane Surface Area [Outer Surface]		72 m² (775 ft²)	29 m² (312 ft²)	20 m² (215 ft²)
Design Flow (m³/hour)		2.6 - 8.0	1.1 - 3.2	0.4 - 1.4
Dimensions	Diameter	216 mm (8.50 inches)	216 mm (8.50 inches)	147 mm (5.79 inches)
	Length	2,160 mm (7.087 ft.)	1,120 mm (3.675 ft.)	1,327 mm (4.35 ft.)
Weight		110 kg (Full of water) 67 kg (After draining)	60 kg (Full of water) 40 kg (After draining)	18 kg (Wet conditions)
Material	Membrane	PVDF (Polyvinylidene uoride)
	Potting	Epoxy Resin or equivalent
	Others	Casing : Polyvinyl chloride		Cap : ABS Protective Cylinder : Polyethylene
Connection		Feed & Filtrate nozzles : Housing type joint 80A Backwash water outlet nozzle : Housing type joint 65A		IDF/ISO Clamp Union Fitting 1.5s
Max. Inlet Pressure		300 kPa (44 psi)
Max. Filtrating Trans-Membrane Pressure		200 kPa (29 psi)		100 kPa (15 psi)
Operating Temperature Range		0 - 40 degree C
pH range		1 - 10 at Filtration 0 - 12 at Chemical cleaning