Best Cheap Small Ro Membrane
USD $421 - $421 /Piece
Min.Order:1 Piece
Qilee Environmental Protection Equipment Co., Ltd.
Small Ro Membrane Products:
•High rejection TM700 series, for high salinity brackish water applications
•Ultra low pressure TMH and TMG series for low salinity brackish water applications
•High rejection TM800 series, for sea water applications
•High pressure & rejection TM800H series, for high salinity sea water applications
•Commercial & household 2" to 4" tap water elements
Small Ro Membrane Special Features:
Hot water sanitizable elements
Chlorine resistant NF elements
Pre-rinsed ultra pure water elements
Custom-made elements for various special applications
Quality
More than 30 years of production experience, thousands of high-performing RO plants throughout the world are the foundation of the excellent reputation that TORAY membrane products have.
SU / TM series: Comparison
Toray offers most of its standard 8" elements with a new flush cut design. The anti-telescoping device (ATD) on new TM elements provides improved face-to-face contact for hydraulic loading, providing more uniform distribution of the loads.
These new flush-cut elements are fully compatible with many other elements in the industry. With its new flush-cut elements, Toray has set its sights on how internal sealing is done, thus ensuring the highest degree of integral sealing between elements within the pressure vessel.
TM720D-370 is a membrane element with high desalination rate, high water yield and chemical cleaning resistance using the latest materials and production technology. The effective membrane area is 370 square feet and the feedwater channel is 34mil. It is suitable for desalination of brackish water with salt content less than 10 000 ppm, desalination of slightly polluted surface water and reuse of cooling circulating sewage. TM720D-370 has the broadest cleaning pH range (pH1-13), which can solve the pollution problem of membrane components quickly and effectively. Reverse osmosis diaphragm can withstand slight residual chlorine leakage accidents caused by operational errors within a certain range, and improve the safety of the system.
Performance Specification for Small Ro Membrane
Membrane element type | Standard desalination rate % | Standard water yield gpd(m3/d) | Effective membrane area ft2(m2) | Runner width(mil) |
TM720D-370 | 99.8 | 10,200 (39) | 370 (40) | 34 |
Test conditions: operating pressure: 225 psi (1.55MPa)
Test fluid temperature: 77°F (25°C)
Test solution concentration: 2000 mg/L (as NaCl)
Water recovery rate of single membrane element: 15%
Test solution pH:7
Minimum desalination rate of single membrane element: 99.65%
Minimum water penetration: 8,200 gpd (31.0m 3 /d)
Application limit condition of Small Ro Membrane
Maximum operating pressure: 600psi (4.1MPa)
Maximum inlet flow rate: 70gpm(382m3 /d)
Maximum inlet temperature: 113°F (45 C)
Maximum influent SDI:5
Free chlorine concentration in water: <0.1mg/L
PH inlet range for continuous operation: 2-11
The pH range of chemical cleaning is 1-13.
Maximum pressure loss of single membrane element: 15psi (0.1 MPa)
Maximum pressure loss of single membrane module: 50psi (0.34MPa)
Small Ro Membrane size (in inches (millimeters))
Standard export carton packing.
3-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity.