Industrial Ultra Low Pressure Cheap Ro Membrane

Cheap Ro Membrane Products:
•High rejection TM700 series, for high salinity brackish water applications
•Ultra low pressure TMH and TMG series for low salinity brackish water applications
•High rejection TM800 series, for sea water applications
•High pressure & rejection TM800H series, for high salinity sea water applications
•Commercial & household 2" to 4" tap water elements

Cheap Ro Membrane Special Features:
Hot water sanitizable elements
Chlorine resistant NF elements
Pre-rinsed ultra pure water elements
Custom-made elements for various special applications

Quality
More than 30 years of production experience, thousands of high-performing RO plants throughout the world are the foundation of the excellent reputation that TORAY membrane products have.

SU / TM series: Comparison
Toray offers most of its standard 8" elements with a new flush cut design. The anti-telescoping device (ATD) on new TM elements provides improved face-to-face contact for hydraulic loading, providing more uniform distribution of the loads.

These new flush-cut elements are fully compatible with many other elements in the industry. With its new flush-cut elements, Toray has set its sights on how internal sealing is done, thus ensuring the highest degree of integral sealing between elements within the pressure vessel.

      Membrane element desalination TM820M-440, effective membrane area of 440 square feet, it has the world's highest level of compression capacity, desalination rate as well as the removal of boron salt removal rate, good performance and stability, can be ensured through the water to obtain high quality from seawater in high recovery conditions. Suitable for seawater desalination, seawater and high concentration brackish water. Can be used for seawater desalination, brackish water desalination and power plant boiler water supply and other industrial water and drinking water, can also be used for wastewater reuse, food has a variety of applications including material concentration and recovery price.

Performance Specification for Cheap Ro Membrane

 Test conditions: operating pressure: 800 psi (5.52MPa)
                           Test fluid temperature: 77°F (25°C)
                           Test solution concentration: 32000 mg/L (as NaCl) ,5 mg/L boron
                           Water recovery rate of single membrane element: 8%
                           Test solution pH:8
Minimum desalination rate of single membrane element: 99.5%
Minimum water penetration: 6200 gpd (23.5m3/d)

Application limit condition of Cheap Ro Membrane

Maximum operating pressure: 1200psi (8.4MPa)
Maximum inlet flow rate: 70gpm(382m3 /d)
Maximum inlet temperature: 113°F (45 C)
Maximum influent SDI:5
Free chlorine concentration in water: not detected.
PH inlet range for continuous operation: 2-11
The pH range of chemical cleaning is 1-12.
Maximum pressure loss of single membrane element: 15psi (0.1 MPa)
Maximum pressure loss of single membrane module: 50psi (0.34MPa)

Cheap Ro Membrane size (in inches (millimeters))