marble block cutting machine 

Pump:

Main technical data:

Main motor power:37KW

Length:1745mm

Max. working pressure:380Mpa

Width:1045mm

Max. flow tate:3.7L/min 

Height:1350mm

Control system:PLC(Omron)

Weight:1200Kg

Cutting Water Inlet pressure:>0.1Mpa

Lp Low Pressure Filter:10um

Cooling Water Inlet pressure:>0.5Mpa

Safety unloading valve:Standard components

Max. oil pressure:20Mpa

Oil level and oil temperature sensor:Standard components

Accumulator Volume:1.2L

High Pressure Outlet Connections:M16×X1.5

Main technology feature:

1. There is shock absorber instal led in the four corners of the motor,which reduces the shock and noise.

2. The wave crest cotton has good effect to low the noise.

3. Double oil filter for inlet and outlet ports,which will improve the clean of hydraulic oil and the stability of machine working.

4. The stage safety unloading valve can discharge the system pressure which guarantee the safety of operators and machine,when the machine need to stop in emergency.

5. There is low pressure inlet water safety overflow switch,which can guarantee the safety of high pressure water,and the inspection of low pressure inlet water can avoid the trouble shooting of machine casued by the less low pressure inlet water supply.

6. The efficient cooling system component can reduce the volume of oil tank and low the wirking cost.

7. Imported intensifier,which guarantee the quility of the whole pump.

Cutting table 

technical data:

Way of drive:AC servo

Max. moving speed:6000mm/min

Control accuracy:±0.01mm

Cutting accuracy:±0.1mm~±0.2mm

Power supply:220V 50Hz

Environmental temperature:-10-50°C

Atmospheric pressure:86Kpa~106Kpa

Dust concentration:Not more than10mg/m³ .

There should not be acidoid, alkaline substance and corrosive substance in the air. The machine should be kept away from hypocenter, heat producer, intense magnetic field, electric field and other source of the disturbance.