Technical Information - APW Waterjet System Components
APW41037Z-A12 Intensifier Pump
Max discharge of SERVO oil pump:						90L/min
Max water discharge:						3.7L/min
Max available orifice diameter:						0.33mm
Max pressure:						410Mpa
Continuous working pressure:						360 ~ 380MPa
Main motor power:						37KW(50HP)
Power supply:						380V/50HZ/3PH
Max.oil pressure:						20Mpa
Length/width/height:						1745/1045/1350
Weight:						1200kg
Specification
Intensifier					A&V(made in USA)
Main Motor					Siemens
Hydraulic Pump					Rexroth servo hydraulic pump
PLC					Omron
Heat Exchanger					Water/Oil panel cooler
Control System					LP/HP auto control
Temperature Display					Digital Temperature Display
Shock Absorber					Four corners of the motor
Directional Valve					Taiwan YUKEN
Accumulator Volume					1.2L
Low Pressure Filter					10um
Cutting Water Inlet Pressure					0.3Mpa
Cooling Water Inlet Pressure					0.3Mpa
High Pressure Outlet Connections					M16 x1.5
Oil level and oil temperature sensor					Standard Components
				APW1520BA Cutting Table
				Structural style					Bridge style
				X and Y axis Travel					1500mm×2000mm
				Z-axis Travel					150mm
				Control accuracy					±0.01mm
				Cutting accuracy					±0.1mm
				Servo motor specification					0.75KW 1.0KM 1.5KW
				X-axis and Y-axis Max. moving speed					6000mm/min
				Z-axis Max. moving speed					1000mm/min
				Specification
				Cutting Head					3-Axis
				Way of Drive					AC Servo
				Servo System					Yaskawa Servo Motor
				Linear guide					SKF (America)
				Ball Screw					Ipiranga (Spain)
				Nozzle and Orifice					America
				Environmental Temp.					2-40 °C
				Atmosphere Pressure					86Kpa~106Kpa
				Dust Concentration					Not More than 10mg/m3
				X, Y-Axis Structure					Aluminium Structure
				Water Tank					Coated Stainless Steel
Main Characteristics of CNC System
EVOC Industrial PC
19 Inch LCD Monitor
Support DXF and NC code file
Forward and backward processing function
Even pace control function
Partial and smooth processing modes
Small arcs speed auto processing function
Circle processing function
Coordinate memory retention function
Double increase and decrease speed data function
Auto Abrasive Delivery System
Max. Inlet Air Pressure					0.6Mpa
Min. Inlet Air Pressure					0.2Mpa
Abrasive Capacity					225Kg
Min. Inlet Air Flow					0.028 m3/min
Operating Air Flow					0.005 m3/min
Self-feeding Control
Air Valve to prevent jams and breakages
Self sealing
Options
4-Axis Cutting Head					Cutting angle 0° - 4°
5-Axis Cutting Head					Cutting angle ±45°
Multiple Cutting Head
Multiple Beams
Auto Height Adjustment System

This waterjet machine is able to be used in METAL cutting.

CNC ultra-high pressure cutting machine is to use intensifier pump to pressurize normal tap water to 100-300Mpa in a split second. Then convert water pressure to dynamic energy through diamond orifice mount assembly. This creates a very high velocity beam of waterjet to generate high speed friction to make cutting.   It is suitable for cutting almost all the materials, such as glass, marble, metal,rubber and wood , and many advantages of it will be greatly found during different materials cutting.