Product Details

Components of the whole set of machine are as follows:

1. Cutting table:

bridge style, Z-axis journey is 150mm, Three-axis control, Auto zero positioning, drives and motors are from Japan, ball screw and linear guide are from Spain and America seperately.

2, Intensifier pump:

Intensifier pump is JETLINETMJL-1from Germany KMT company's branch in Shanghai

3. CNC controller:

EVOC brand Industrial Personal Computer and 19BENQ LCD, specialized waterjet cutting software, Omron brand PLC instead of relay,

Windows XP based.

4.Accessories: spare parts and deionization system.

5.New products: 4-axis cutting head, 5-axis cutting head and auto abrasive feeder.

Common used models and their technical data are as follows:

APW38037Z- JETLINETMJL-1××××BA bridge style cutting table series
Table model	1520BA	1525BA	1530BA	2015BA	2515BA	3015BA
Cutting area	1.5m×2m	1.5m×2.5m	1.5m×3.0m	2.0m×1.5m	2.5m×1.5m	3.0m×1.5m
Max moving speed	6000mm/min	6000mm/min	6000mm/min	6000mm/min	6000mm/min	6000mm/min
Way of drive	AC servo	AC servo	AC servo	AC servo	AC servo	AC servo
Control accuracy	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01
Cutting accuracy	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2
Pump model	JETLINETMJL-1	JETLINETMJL-1	JETLINETMJL-1	JETLINETMJL-1	JETLINETMJL-1	JETLINETMJL-1
Max working pressure	380Mpa	380Mpa	380Mpa	380Mpa	380Mpa	380Mpa
Motor rated current	380V/50HZ 43 A	380V/50HZ 43 A	380V/50HZ 43 A	380V/50HZ 43 A	380V/50HZ 43 A	380V/50HZ 43 A
Control voltage and power supply	24VDC	24VDC	24VDC	24VDC	24VDC	24VDC
Control system	Siemens	Siemens	Siemens	Siemens	Siemens	Siemens
Max. water discharge	2.3L/min	2.3L/min	2.3L/min	2.3L/min	2.3L/min	2.3L/min
Compressed air pressure	5.9 bar	5.9 bar	5.9 bar	5.9 bar	5.9 bar	5.9 bar

6. Applications

This machine can be used in many materials cutting and has a lot of advantage than other cutting methord, no heat effected zone, narrow kerf, good edge finish and high accuracy.

The application is below:

metal product cutting

marble product cutting

glass product cutting

granite, stone,steel, aluminium,rubber, plastic and other materials.

7. Cutting speed

The cutting speed depends on the thickness of material, the thicker the slower.The following is the reference cutting speed of different material with different thickness.

Material	Thickness(mm)	Cutting Speed of 300MPa pump working pressure is 260MPa(mm/min)	Cutting Speed of 380MPa pump working pressure is 330MPa (mm/min)
Marble	20	300	380
Marble	30	200	300
Granite	20	250	330
Granite	30	150	200
Glass Brick	12	800	960
Glass	5	1200	1500
	10	500	600
	20	350	420
Glue Chipped Glass	10	450	540
Sponge	50	5000	6000
Foam	50	5000	6000
Wood	10	1000	1200
Wood	50	200	240
Steel	2	600	720
	4	400	500
	6	300	420
	8	200	300
	10	120	200
	15	75	120
	20	30	50
	60	12	20
Laminates	10	1500	1800
Aluminum	5	350	500
Copper	5	350	420
Glass Fibre Reinforced plastic	2	1200	1500

Cutting samples