Damage of loose chain of U-shaped spiral conveyor to equipment
U-shaped spiral conveyor non-axle spiral conveyor such as a chain, the chain should have a good degree of looseness, such as the most standard. If it is too loose, the non-axle spiral conveyor will easily unchain at the time of operation, resulting in destruction. Conversely, too tight will increase the waste of power and will also form the destruction of components. It can be pressed down or lifted from the middle of the chain during commissioning, and the middle distance between the two is between 23 %. After a period of time in the application of the non-axis spiral conveyor, many parts can be removed first when it is difficult to accurately adjust. Here, it is important to remember that if the even number is always inserted, the lock piece should be inserted outside. The direction of the lock piece should be turned in the opposite direction. In the process of maintaining the non-axis spiral conveyor, we must also strictly check the old and new conditions of each component and update them in a timely manner. So as not to destroy other parts. If it is the chain-gear wear of the non-axle spiral conveyor, but it has not yet reached the point of throwing, then turn it over and apply it, as it can extend its service life. The non-axle spiral conveyor is usually not prone to blockage or the discharge port is not available. It can run at low speed, reduce energy consumption, and the non-shaft spiral conveyor has long transport intervals. It can adopt multi-stage serial devices and transport materials at ultra-long intervals.. However, in some moments, the living slag, when the inorganic animals are transported, will also cause the destruction of spiral blades. The thickness of the spiral blade is also more wear-resistant and durable, suitable for transporting materials. The spiral blade wear of the non-axial spiral conveyor is mainly on the edge of the blade. The farther away from the rotating axis, the greater the force, and the number of cracks that occur in the air. The more. What points need to be paid attention to when purchasing spiral feed machines: spiral feed machines secretly pay attention to quality so as to reach the uniform effect of gentle delivery of speed. After the development of speed, we have gathered a large number of skilled talents and management teams. Before starting the machine, we should reflect on whether the electrical appliances can be normal. According to the need to add about 10 mm of polybenzene fiber in the mortar, it can be transported to various powder or granular ores. According to the moving state of the material, convection is produced. Whether it is an autonomous product or an agent product, it has reached the advanced product of the same product in the country, especially the double helix feed machine. Wipe the mixing pan and leaf with a wet cloth. For more details or any questions, please call customer service.