Prawn Cracker Production Line Wholesale|Shrimp Cracker Machine

1.Purpose and Scope of Use of Shrimp Chip Making Machine

This shrimp cracker making machine is special equipment for shrimp crackers production, this machine has stable performance, wide applicability and the required less operators etc, mainly use corn starch, rice and potato starch as raw material, produce different type of prawn crackers.

2. What is Shrimp Chips

Shrimp chips, also named prawn crackers, shrimp crackers, krupuk, is a kind of deep-fried snack made from shrimp and starch, popular in East Asian cuisine.

3. Ratio of Raw Materials:

50 kg corn starch and water 19-20 kg, 50 kg of starch and salt 1 kg, 50 kg starch and 0.25 kg of cooking oil.

4.Installation and Use of Shrimp Cracker Production Line

1). Before using curing machine, add the oil 2 liters to gear box.

2).The machine should be installed on the flat solid concrete ground.

3).Check the machine parts is complete, the bolt is strong.

4).Confirm the parts in good condition, connect power, make the machine idle run for 2-3 minutes, no other exceptions, begin to work.

5).Pour mixed starch raw material into feeding machine inside the bucket, running for 1 to 2 minutes until temperature in cylinder rise, and then adjust the feeding machine speed.

5.Troubleshooting Methods:

Reasons for lack of maturity: Insufficient heat in the initial stage, excessive moisture, loose belts, and insufficient rotation speed.

Remedy: Reduce moisture, adjust the tightness of the belt.

Re-extruding and Shaping Mchine:

The shrimp slice Re-extruding and shaping part is a special equipment for the shrimp slice curing machine. The curing machine puts the starch raw material into the molding machine after being cooked, and produces shrimp sticks of different specifications (the specifications are determined according to the customer's required size).

The shrimp sticks produced on the ground shall be covered with plastic cloth. Each layer shall be covered with a layer of plastic cloth. The maximum size shall be 60 centimeters high, and then the quilt or towel shall not be used. The position shall be 3-6 hours. You can slice later.

Note: Add 45# engine oil once a month to the bearing box of the molding machine.

Slicer Machine:

The slicing machine is a special equipment for the maturation machine molding machine. Before using the slicing machine, first check whether the bolts in each part are loose and whether the cutting edge is sharp. Only after inspection, can the slices be produced.

Before each slice of the cutterhead, apply some cooking oil on the blades. The thickness of the shrimp slices will be adjusted according to the customer's demand. After the shrimp machine is cutting out the speed of the feeder, the speed of the feeder will be thin.

Prawn Cracker Making Machine Maintenance

1. The prawn cracker making machine should inject oil into the bearing tile box on time.

2. Check the machine every day during work and check the machine

Whether the bolt is loose or if the oil seal leaks.

3. After the shutdown of each work, the material on the barrel and screw must be cleaned.

High Efficiency Prawn Crackers Processing Line Parameters

Contact Us

If you are interested with our high efficiency prawn cracker processing line,welcome to contact with me!

Email: ellie@machinehall.com

Whatsapp:+8618595717505

Skype: leo.liufan