Product Details

Delivery Time:5
Certification:CE ISO9001

Goyen Cast Aluminum diaphragm valve CA62T 010-300 2 1/2 \" AC230V 50/60Hz pulse jet valve

Description
High performance diaphragm valve with threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.

Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.

Constuction Material:

Body	Aluminium (diecast)
Ferrule	304 SS
Armature	430FR SS
Seals	Nitrile or Viton (reinforced)
Spring	304 SS
Screws	302 SS
Clip	Mild steel (plated)
Locknut	Mild steel zinc passivated
Voltage	DC: 24V, AC: 24V,48V,110V,230V
Working Temperature	- 20 to + 85 ℃
Protection Class	IP65
Coil Insulation Class	F
Working Pressure	0.35-0.85Mpa
Diaphragm Seat	PA-6 or Viton coated mild steel or High Density PE
Sealing & disc	CR (chloroprene)
Diaphragm	NBR(nitrile/buna-n) or Viton
Shading coil	Copper
Connector	DIN43650A

Weight:

Size	Integral Pilot	Remote Pilot
(CA) Kg (lbs)	(RCA) Kg (lbs)
20	0.60 ( 1.31 )	0.38 ( 0.83 )
25	0.73 ( 1.61 )	0.51 ( 1.13 )
35	1.04 ( 2.28 )	0.83 ( 1.83 )
45	1.50 ( 3.30 )	1.28 ( 2.83 )
50	2.89 ( 6.38 )	2.68 ( 5.92 )
62	3.31 ( 7.30 )	3.09 ( 6.82 )
76	4.77 ( 10.52 )	4.56 ( 10.04 )

INSTAllATION:

1	The valves can be mounted in any position without affecting operation
2	Threaded pipe connection is: G = G (ISO 228/1) or compression fittings
3	When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations
4	Ensure supply air is clean and dry.
5	Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
6	Apply moderate pressure to system and check for installation leaks.
7	For compression fitting types tightness is achieved by the compressed gasket on the blow tube
8	Other pipe threads are available on request
9	Installation/maintenance instructions are included with each valve
10	Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).

Maintenance:
Before conducting any maintenance activity on the system ensure that components are fully isolated from
pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually

DIMENSIONS (mm) :

Product show:

Fitted Repair kits code: Diaphragm K5000 / K5004(Vition)