Product Details

Delivery Time:5
Certification:CE ISO9001

Goyen DIN43650A Aluminum diaphragm valve CA50MM 010-300 2 \" AC230V pulse jet valve

Operation :
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater

Suitable for

Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.

Constuction Material:

Body	Aluminium (diecast)
Ferrule	304 SS
Armature	430FR SS
Seals	Nitrile or Viton (reinforced)
Spring	304 SS
Screws	302 SS
Clip	Mild steel (plated)
Locknut	Mild steel zinc passivated
Voltage	DC: 24V, AC: 24V,48V,110V,230V
Working Temperature	- 20 to + 85 ℃
Protection Class	IP65
Coil Insulation Class	F
Working Pressure	0.35-0.85Mpa
Diaphragm Seat	PA-6 or Viton coated mild steel or High Density PE
Sealing & disc	CR (chloroprene)
Diaphragm	NBR(nitrile/buna-n) or Viton
Shading coil	Copper
Connector	DIN43650A

Description

High performance diaphragm valve with threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.

INSTAllATION:

1	When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations
2	Ensure supply air is clean and dry.
3	Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
4	Apply moderate pressure to system and check for installation leaks.
5	For compression fitting types tightness is achieved by the compressed gasket on the blow tube
6	Other pipe threads are available on request
7	Installation/maintenance instructions are included with each valve
8	Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
9	Fully pressurise system.
10	Test fire and listen for proper actuation and crisp pulse noise.

Maintenance:
Before conducting any maintenance activity on the system ensure that components are fully isolated from
pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually

Product show:

Fitted Repair kits code: Diaphragm K5000 / K5004(Vition)